Instruction Manual

User’s Manual 13

Care and Maintenance

Cleaning the Scanner

In order to maintain the scanned image quality and prevent dust accumulation, it

is recommended that you clean the scanner (outer casing, image sensor and

roller inside the scanner) regularly (about every 150-200 scans) using only the

recommended and supplied tools.

CAUTION: Do not use any tools other than the supplied ones to clean the

image sensor and roller inside the scanner. Otherwise they will be permanently

damaged. Make sure that there is no visible dust on the cleaning tool before

using.

Cleaning the roller

Original

Scanned image (over-

cropped)

1. Connect the power supply to the scanner.

2. With scanner power off, press and hold the Power button for 5 seconds. The

scanner will enter cleaning mode.

3. Insert the supplied roller cleaning sheet as shown.

Note the direction of the black sponge on the sheet

when inserting.

4. The cleaning sheet will be brought into the feeding slot automatically, and the

cleaning process will begin.

UM_EEMEA_Scan_1108.book Page 13 Monday, December 15, 2008 2:26 PM