Adjustable Speed Drive Installation and Operation Manual

272 H9 ASD Installation and Operation Manual
Block Write Data 2, 213
Brake Answer Wait Time, 188
Braking Mode Selection, 142
Braking Resistance Overload Time
(10x rated torque), 192
Braking Time Learning Function, 144
C
Cable/Terminal Specifications, 265
Carrier Frequency, 56
Carrier Frequency Control Mode, 138
Carrier Frequency/Thermal derating, 190
CC, 21
CCA, 21
Change Step Selection 1, 200
Change Step Selection 2, 200
Changed From Default, 51, 74
Changed From Default screen, 74
Charge LED, 9, 16
Circuit breaker configuration, 15
Clearing a Trip, 255
Clock Setup, 50
CM1, 247
CM2, 247
CMOD/FMOD Change Lockout, 202
Command Control Selections, 39
Command Mode, 77
Command Mode and Frequency Mode Control, 36
Command Source, 72
Commercial Power Switching Freq. Hold Time, 147
Commercial Power Switching Wait Time, 147
Commercial Power/ASD Output Switching, 146
Commercial Power/ASD Switching Frequency, 147
Communication Adjustments, 64
Communication Error, 251
Communication Settings, 64
Communications, 64
Communications Option (DeviceNet/Profibus)
Setting 1, 209
Communications Option (DeviceNet/Profibus)
Setting 2, 210
Communications Option (DeviceNet/Profibus)
Setting 8, 211
Communications Option Speed Switch
Monitor DeviceNet/CC-Link, 213
Communications Option Station Address Monitor, 212
Communications setting changes, 74
Communications Time Out Time
(2- and 4-wire RS485), 205
Communications Time-Out Action
(2- and 4-wire RS485), 205
Compensation Frequency, 43
Concerns about this publication, 1
Conduit Plate Information, 256
Connecting the ASD, 16
Connection Diagram, 26
Continuous Dynamic Braking Capacity, 137
Contrast, 51
Control Power Undervoltage, 254
Cooling Fan Control, 186
CPU Fault, 251
Crane/Hoist Settings, 56
Creeping Frequency, 143
Creeping Time, 144
Cumulative Operation Time Alarm, 186
Current Control Proportional Gain, 160
Current/Voltage, 263
Current/Voltage Specifications, 263
Customer Support, 2
D
dbOn, 247
DBR Load, 43
DBR OL (Overload) Trip, 43
DBR over-current, 269
DBR Overload, 43
DC Bus Voltage, 43
DC Injection Braking, 52
DC Injection Braking Current, 124
DC Injection Braking Start Frequency, 124
DC Injection Braking Time, 125
Deceleration Suspend Frequency, 145
Deceleration Suspend Time, 145
Deceleration Time 1, 80
Deceleration Time 2, 164
Deceleration Time 3, 169
Deceleration Time 4, 170
Default Setting Changes, 74
Direct Access, 49
Direction, 45
Disconnection Detection Extended Time, 212
Discrete Input, 21, 25
Discrete Input Terminal Assignment, 236
Discrete Input Terminals, 45
Discrete Output, 21
Display Bias, 200
Display Gradient Characteristic, 199
Display Installation Note, 32
Display Parameters, 49
Display Unit Multiplication Factor, 199
Display Unit Selection, 199
Display Units for Voltage and Current, 199
Disposal, 3
Drive Characteristics, 13