User Guide

______________________________________________________
UPDATE CURRENT STOCK
The final stage of stocktaking is to update the current stock. This procedure posts the
discrepancies found between the stock Snapshot and the stock count to the current 'live'
stock. Optionally, any items for which no count has been entered can have their stock
set to zero. Following this procedure the current 'live' stock will be correct as of the last
stock take, taking into any movements up to the current date.
Location
This is the Location for which the current stock is to be updated by the stock counted
values.
Set uncounted stock items to zero
This allows you to only stock take one section of products at once, those products which
have not been counted will have a stock counted value of zero. This discrepancy is to be
copied across to the current stock field as the true counted value. Alternatively, if this
box is selected then the current stock field for these items is to remain at zero as they
were not counted.
60