Laptop User Manual

User’s Manual EN-68
TOSHIBA FOLIO 100
Installing the battery pack
To install a battery pack, follow the steps as detailed below:
1. Align the connectors of the battery pack with that of the device and
gently insert the battery pack into the device at about a 30 degree
angle.
(Sample Illustration) Installing the battery pack
2. Ensure that the battery pack is securely in place and the battery lock is
in its lock ( ) position.
3. Seat the cover in place and slide the cover lock to its lock ( ) position.
Mini USB port
This device is equipped with a mini USB port that enables you to connect to
a computer.
To connect to a computer:
1. Plug the Mini USB connector of a USB cable into the Mini USB port on
this device.
2. Plug the other end of the USB cable into the USB port on the computer.
3. Tap the “USB connected” notification in the notifications panel and then
tap the “Mount” button.
Then this device becomes a removable USB mass storage device and you
can access its content from the computer.
To remove this device from the computer, tap the “Turn off USB storage”
notification in the notifications panel and then tap the “Turn Off” button.
■ Make sure the connector is properly aligned with the socket. Do not try
to force the connection, doing so can damage the connecting pins.
■ Mini USB port only supports slave mode.