Copier User Manual

Using Bypass Tray 63

Check the menu.

If the paper size has already been registered, the following menu is displayed.

In this case, proceed to step 5.

If the paper size has not been registered, the following menu is displayed.

In this case, proceed to step 3.

Set the paper size.

Press the selecting button B or C to select the size of paper placed in the drawer. This

can also be done with the or button. Then press the [ENTER] button.

e.g.) Setting LT size

When the paper is other than standard sizes, select “NON_SIZE”.

Set the paper type.

Press the selecting button C to select paper type. This can also be done with the or

button. Then press the [ENTER] button.

e.g.) Thick paper (21 to 28 lb. Bond)

You can select the media type from the following four:

THICK PAPER 1: Thick paper (21 to 28 lb. Bond)

THICK PAPER 2: Thick paper (29 lb. Bond to 90 lb. Index), sticker labels

TRANSPARENCY: Overhead transparencies

PLAIN: Plain paper (17 to 20 lb. Bond), tracing paper

If you select a different media type from the one you placed on the bypass tray, this could

cause a paper jam or the quality of the copied image could be lowered.

100% SORT

ZOOM FINISHING EDIT

Ready for bypass

Select paper size

NON_SIZE

COMP

13LG

Select paper size

PAPER TYPE THICK PAPER1

THICK PAPER2

TRANSPARENCY