All in One Printer User Manual

3. Printing

Printing Guide — Printing from Macintosh 289

2) Department Code

Select whether a department code is required for printing. When this is enabled,

specify the 5-digit department code in the field next to the drop down box.

Enabling the department code depends on whether this equipment is managed with

department codes or not. Please ask your administrator for your department code.

3) Do not Print Blank Pages

Select whether you require printing blank pages.

4) Distinguish Thin Lines

Select whether you require printing thin lines clearly.

— Printer Features

In the Printer Features menu, you can set special printing features.

Printing Modes

In the Printing Modes menu, you can set the way this equipment handles the print job.

This menu allows you to enable various job types such as Private Print and Proof Print.

NOTE: This menu is only displayed for Mac OS X 10.2.4 to 10.2.8. When you want to set the

printing mode in Mac OS X 10.3.x, set in the Print Mode menu.

 P.288 "Print Mode"

1) Print Mode

This sets the type of print job.

- Normal — Select this to print a normal job.

- Proof — Select this to print the first copy of a multicopy job and then wait for

approval before printing the remaining copies. The print job, sent as a proof job,

is saved in the proof job queue on this equipment, and the remaining copies are

not printed until you activate printing from the Touch Panel Display. This option

allows you to check a job’s output before printing the remaining copies and

thereby reduce paper waste.