Operation Manual

Appendix A - menu system > 152
Print Setup
(cont.)
Color Menu Density Control Auto If set to Auto, image
density will be
automatically
adjusted at power on,
when a new image
drum or toner
cartridge is installed,
and at intervals of
100, 300 and 500
drum counts. If a 500
drum count interval
occurs during a print
job it will occur at the
end of that job, and
will take up to 55
seconds. If set to
manual, this
adjustment will only
be performed when
initiated by the next
menu item.
Adjust Density Execute Selecting this will
perform the auto
density set up
immediately.
Color Tuning/Print
Pattern
Yes, No Selecting this item
prints the colour
tuning pattern to help
you adjust the colour
balance.
Cyan Highlight 0 Adjusts image density
for each colour
component (cyan,
magenta, yellow and
black). Normal setting
is 0.
Cyan Mid-Tone 0
Cyan Dark 0
Magenta Highlight 0
Magenta Mid-Tone 0
Magenta Dark 0
Yellow Highlight 0
Yellow Mid-Tone 0
Yellow Dark 0
Black Highlight 0
Black Mid-Tone 0
Black Dark 0
Cyan Darkness 0 Adjusts darkness of
each colour (cyan,
magenta, yellow and
black). Normal setting
is 0.
Magenta Darkness 0
Yellow Darkness 0
Black Darkness 0
ITEM OPTION DEFAULT VALUE/DESCRIPTION