Operation Manual

Menu functions > 34
FX EMULATION
This menu controls settings effective when the printer is operating in FX emulation mode.
FIT TO LETTER DISABLE
ENABLE
Sets the printing mode that can fit print data,
equivalent to 11 inches (66 lines), in the LETTER-size
printable area.
TEXT HEIGHT SAME
DIFF
Sets the height of a character.
SAME: Regardless of CPI, same height
DIFF: As CPI, character heights vary.
ITEM SETTINGS EXPLANATION
CHARACTER PITCH 10 CPI; 12 CPI; 17
CPI; 20 CPI;
PROPORTIONAL
Specifies character pitch in this emulation.
CHARACTER SET SET-1
SET-2
Specifies a character set.
SYMBOL SET IBM-437 (Default
Symbol Set only
shown)
Specifies a symbol set.
LETTER 0 STYLE DISABLE
ENABLE
Specifies the style that replaces 9BH with letter o and
9DH with a zero
ZERO CHARACTER NORMAL
SLASHED
Sets the zero to be slashed or unslashed.
LINE PITCH 6 LPI; 8 LPI Specifies the line spacing.
WHITE PAGE SKIP OFF / ON Selects whether blank pages are printed or not.
CR FUNCTION CR / CR+LF Selects whether a received carriage return character
(0Dh) also causes a line feed.
LINE LENGTH 80 COLUMN; 136
COLUMN
Specifies the number of characters per line.
FORM LENGTH 11 INCH
11.7 INCH
12 INCH
Specifies the length of paper.
TOF POSITION 0.0INCH ~ 1.0INCH Specifies the distance of print from the top edge of the
paper.
LEFT MARGIN 0.0INCH ~ 1.0INCH Specifies the distance of print from the left hand edge
of the paper.
FIT TO LETTER DISABLE
ENABLE
Sets the printing mode that can fit print data,
equivalent to 11 inches (66 lines), in the LETTER-size
printable area.
TEXT HEIGHT SAME
DIFF
Sets the height of a character.
SAME: Regardless of CPI, same height.
DIFF: As CPI, character heights vary.
ITEM SETTINGS EXPLANATION