Owner's Manual

77
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VCR Functions
Basic Setup /
TV View Operation
* If you are still having trouble with the unit after checking all the Troubleshooting points, write down the error code and the error
description and consult your dealer.
Recording Error
Disc is full.
(No area for new recording)
• You are trying to record onto the VR
mode DVD-RW disc that has no space
for recording.
• Insert a recordable disc with enough
recording space.
• Delete unnecessary original titles.
(See page 56.)
Recording Error
You cannot record more than 99
titles on one disc.
(The maximum is 99)
• You are trying to record onto the
DVD-RW / -R disc on which the number
of recorded titles has reached the
maximum (99).
• Delete unnecessary original titles.
(See page 56.)
Recording Error
You cannot record more than 999
chapters on one disc.
(The maximum is 999)
• You are trying to record onto the VR
mode DVD-RW disc on which the
number of recorded chapters has
reached the maximum (999).
• Delete unnecessary chapter mark from
an Original list. (See page 57.)
Recording Error
You cannot record more than 49
titles on one disc.
(The maximum is 49)
• You are trying to record onto the
DVD+RW/+R disc on which the number
of recording titles comes up to the
maximum (49).
• Delete unnecessary titles.
(See page 56.)
Recording Error
You cannot record more than 254
chapters on one disc.
(The maximum is 254)
• You are trying to record onto the
DVD+RW disc on which the number of
recording chapters comes up to the
maximum (254).
• Delete unnecessary chapter marks.
(See page 57.)
Recording Error
You cannot record on this disc as
Control Information is full.
• This disc has no space to write Control
Information when recording or deleting
contents.
• When editing has been repeatedly
performed, the control information area
may become full even though the
recording area has enough space.
• Delete unnecessary original titles.
(See page 56.)
Recording Error
You cannot record on this disc as
Power Calibration Area is full.
• When recordings are performed
repeatedly onto an unstable disc, this
area may become full.
• Every time you insert a disc for
recording, part of the disc’s working area
will be used. If you repeat this frequently,
it will be used up quicker and you may
not be able to record maximum number
of titles for the disc.
• Insert a new disc.
Recording Error
This disc is already finalised.
• You are trying to record onto a disc that
is already finalised.
• Release the finalising for the disc.
(See page 42.)
Recording Error
The disc has no recording
compatibility.
Set “Make Recording Compatible” to
“ON” to convert the disc.
• You are trying to record onto the
unfinalised +VR mode discs recorded on
other unit.
• Set “Make Recording Compatible” to
“ON” to rewrite the menu, after that you
will record to disc. (See page 30.)
Error message Cause Solution
90_Others.fm Page 77 Friday, January 8, 2010 3:54 PM