User manual
Table Of Contents
- Surveillix™ XVSe / DVSe
- Hardware Manual
- Manual Edition 30340AF – SEPTEMBER 2011
- Printed in USA
- About this Guide
- Technician Notes
- Product Description
- Features
- Front Panel Controls
- Rear Panel Connectors
- Identifying Included Components
- Optional Components
- Keyboard Setup
- Mouse Setup
- Monitor Setup
- Power Setup
- Making Connections on an XVSe
- Making Connections on DVSe
- Hard Drive Array (DVSe only)
- Turning on the recorder
- Turning Off the recorder
27
MAKING CONNECTIONS ON AN XVSe
Connecting a Video Source
There are different types of Video Sources that can be plugged into the XVSe including DVD players, VHS players, and CCTV Cameras. The
back of the XVSe contains up to 16 video inputs depending on the model. The connectors use the BNC standard.
The video inputs are 75 Ώ BNC connectors. Plug one end into the video source (DVD, Camera, etc.) and plug the other end into the desired
BNC input on the recorder.
Connecting Sensors
Each XVSe has 16 Sensor inputs. These inputs can be used with devices such as infrared devices, motion device, glass breakage alarms,
door and window trips, and many more. The Sensors can be set to Normally Open or Normally Closed inside the software.
There are 4 Common Grounds (-) and 16 sensor inputs (+). There is no power supplied to the ports so an external power supply must be used
if power is necessary.
Common Ground
Sensor Inputs