Television 62HM14, DLPTM OWNER'S MANUAL

Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
58
(E) 62HM14
5. Grasp the lamp unit handle and gently pull the
lamp unit straight out of the TV. Set the old lamp
unit aside (see “Lamp unit disposal” on page 60).
6. Carefully insert the new lamp unit straight into the
TV until it is fully seated.
Note :
• Never subject the lamp unit to excessive shock.
• Never touch the lamp unit glass or otherwise get it dirty.
Doing so may affect the image quality and reduce the
service life of the lamp. See “Cleaning the lamp unit
glass” at right.
7. Using a manual Phillips screwdriver, tighten the two
lamp unit screws.
Note: Hand-tighten only. Do not use an electric
screwdriver.
CAUTION: NEVER clean
a hot lamp with any type of
flammable liquid or aerosol cleaning
agent.
Many ordinary cleaning agents
(such as glass cleaners) contain chemicals
that may be flammable at certain
temperatures. If the lamp unit is not
allowed to cool for at least one (1) hour,
such chemicals may ignite.
Lamp unit screws
(use manual Phillips screwdriver only)
NOTE : Make sure the lamp unit and screws are
installed securely; otherwise, the TV may not turn on
and the lamp life may be shortened.
Wear gloves
when replacing
the lamp unit.
Cleaning the lamp unit glass
If you accidentally touch the lamp unit
glass or otherwise get it dirty, wipe it with a
lint-free lens cleaning cloth (such as a cloth
for cleaning camera lenses or eyeglasses).
8. Reattach the lamp unit door, making sure to insert
the hooks on the left side of the lamp unit door
inside the opening in the TV cabinet.
9. Replace the thumb screw and hand-tighten.
10. Plug in the power cord and turn on the TV. After
the initial warmup period (which may take up to
several seconds for full picture brightness), the TV
should operate normally. If any of the following
conditions exist, turn off the TV, unplug the power
cord, and repeat steps 1–9 to ensure that the lamp
unit and lamp unit door are installed correctly:
• No picture
• Dark picture
• TV will not turn on
If, after repeating steps 1–9, the problem still exists,
call Customer Service at 1-800-631-3811.
Thumb screw
(hand-tighten only)
Insert the
hooks inside
the TV
cabinet
opening.
Lamp unit door
Lamp unit door
NOTE : Make sure the lamp unit door is installed
securely; otherwise, the TV may not turn on.
How to replace the lamp unit (continued)
62HM14(E)56-59 1/24/05, 10:28 PM58