Introduction Connecting your TV Using the Remote Control OWNER'S MANUAL Model: Appendix Owner's Record The model number and serial number are on the back of your TV. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV. Index 46H84 46H84C 51H84 51H84C 57H84 57H84C 65H84 Using the TV’s Features Setting up your TV Projection Television Serial No.
Dear Customer, Thank you for purchasing this Toshiba TV. This manual will help you use the many exciting features of your new TV. Before operating the TV, please read this manual completely, and keep it nearby for future reference. Safety Precautions WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
Important Safety Instructions 1) 2) 3) 4) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 5) Do not use this apparatus near water. Installation, Care, and Service Installation Follow these recommendations and precautions and heed all warnings when installing your TV: 16) Never modify this equipment.
24) Always operate this equipment from a 120 VAC, 60 Hz power source only. 30) [This item applies to projection TVs only.] If the air temperature rises suddenly (for example, when the TV is first delivered), condensation may form on the lenses. This can make the picture appear distorted or the color appear faded. If this happens, turn off the TV for 6 to 7 hours to allow the condensation to evaporate.
Important Safety Precautions for Split Cabinet Feature (Models 57H84 and 65H84 only) Toshiba TV models 57H84 and 65H84 have a split cabinet feature that allows disassembly of the cabinet into two sections during installation. For details, please refer to the insert titled “Disassembly/ Reassembly Instructions for Split Cabinet Feature” that accompanied this owner’s manual in the accessory pack. If you do not have the insert, you can download a copy of it from our Web site (www.toshiba.com/tacp in the U.S.A.
Important Safety Information ............................. 2-5 Introduction ................................................................ 7 Welcome to Toshiba ......................................................... 7 Exploring your new TV ................................................... 7 Connecting your TV .................................................. 8 Connecting a VCR .......................................................... 9 Connecting a cable converter box ..............................
Introduction Introduction Welcome to Toshiba Congratulations! You have purchased one of the finest projection TVs on the market. The goal of this manual is to guide you through setting up and operating your Toshiba TV as quickly as possible. This manual applies to models 46H84, 51H84, 57H84 and 65H84. Before you start reading, check the model and serial numbers on the back of your TV. Write these numbers in the space provided on the front cover of this manual for your records.
Introduction Connecting your TV Note: Cables are not supplied with your TV. ● Connecting your TV ● ● ● Using the Remote Control ● Coaxial cable is the cable that comes in from your antenna, cable TV service, or cable converter box. Coaxial cable uses “F” connectors. Standard A/V (audio/video) cables usually come in sets of three, and are typically color-coded according to use: yellow for video, red for stereo right audio, and white for stereo left (or mono) audio.
Introduction Connecting a VCR From Cable Box or Antenna Note: If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. If you have a VCR with S-video, use an Svideo cable (in the S-video jacks) instead of the standard video cable. Do not connect a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time, or the picture performance will be unacceptable.
Introduction Connecting a cable converter box and VCR Connecting your TV This connection allows you to watch and record basic and premium cable channels, watch videotapes, and record one channel while watching another channel. To watch basic cable and use the TV’s features, select ANT-1. To view premium channels or record with the VCR, select ANT-2, tune the TV and VCR to channel 3 or 4 (whichever channel is vacant in your area), and use the converter box to change channels.
Introduction Connecting a DVD player or satellite receiver and a VCR Stereo VCR Connecting your TV Note: For the highest possible picture quality from a DVD player or satellite receiver without component video or HDMI, use an S-video cable. (If your DVD player has component video, see page 12. If your DVD player or satellite receiver has HDMI, see page 15.
Introduction Connecting a DVD player with ColorStream® (component video) and a VCR Using the Remote Control Connecting your TV This connection allows you to watch DVD, VCR, and TV programs, and record TV programs. Your TV has ColorStream® (component video) inputs. Connecting your TV to a DVD player with component video inputs (such as a Toshiba DVD player with ColorStream®) can greatly enhance picture quality and realism.
Introduction Connecting a DTV receiver/set-top box with ColorStream® (component video) and a VCR Note: For the highest possible picture quality, use component video cables (or a HDMI cable) between the TV and DTV receiver/set-top box. Connecting your TV You can connect component video cables to either set of ColorStream jacks on the TV (HD1 or HD2). For HDMI connection, see page 15.
Introduction Connecting two VCRs Connecting your TV This connection allows you to record (dub/edit) from one VCR to another VCR while watching a videotape. You can also record from one TV channel while watching another TV channel. You will need: • two coaxial cables • two sets of A/V cables Do not connect the same VCR to the output and input jacks on the TV at the same time. To dub or edit, VCR 2 must select Line IN, and the TV must select VIDEO 1 (see “Selecting the antenna input” on page 23).
Introduction Connecting a HDMI device to the HDMI input ×V) No. of dots (H× Vertical frequencies 1080i 1920×1080i 59.94/60Hz 720p 1280×720p 59.94/60Hz 480p 720×480p 640×480p 59.94/60Hz 480i 720×480i 59.94/60Hz Note: This TV is not intended for connection to and should not be used with a PC (personal computer). You will need: • one HDMI cable (this HDMI connecter is type A.
Introduction Connecting a DVI device to the HDMI input • one HDMI–DVI conversion cable • one pair of standard audio cables DVI device (for example, set-top box or DVD player) VIDEO DVI OUT AUDIO L R Connecting your TV IN If the external device has DVI output only, use an HDMI–DVI conversion cable to connect to the HDMI jack on the TV. Also, connect the AUDIO OUT signal from the external device (set-top box or DVD player) to the AUDIO IN jacks next to the HDMI input.
Introduction Using the remote control Preparing the remote control for use Connecting your TV Your TV remote control can operate your TV and most cable converter boxes, satellite receivers, VCRs, DVD players, and HTIBs (home theater in a box), even if they are different brands. If you have a Toshiba device: Your TV remote control is preprogrammed to operate most Toshiba devices. See page 20.
Introduction Programming the remote control to operate a cable converter box, satellite receiver, VCR, DVD player, or HTIB (home theater in a box) CODE INFO 2 3 4 5 6 7 8 9 0 NU ME E IT OR V FA Channel Number CHRTN +10 100 TO P ENT FAV PI C GU ID SI ZE MENU DVDMENU EN EX IT TE R ER FAV TV CBL/SAT VCR DVD CH CL PAUSE FREEZE FF E Device Switch VOL POP DIRECT CH MUTE TV/VCR AR Connecting your TV Using the Remote Control Setting up your TV DEVICE RECALL POWER POWER E
Introduction Remote control codes (cont.
Introduction Using the remote control to operate a cable converter box, satellite receiver, VCR, DVD player, or HTIB (home theater in a box) Connecting your TV If you have a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate, you must first program the remote control to recognize the device (if you have not already done so). See pages 18 and 19.
Introduction Learning about the remote control The buttons used for operating the TV only are described here. POWER turns the TV on and off TV / VIDEO RECALL RECALL displays screen information (page 57) 1 2 3 4 5 6 7 8 selects video input source (page 49) Device Switch switches between TV, CBL/SAT, VCR, and DVD (Pages 18-20) Set to “TV” to control the TV.
Setting up your TV Learning about the menu system Connecting your TV I After you have installed the batteries and programmed the remote control, you will need to set some preferences on the TV using the menu system. You can access the menu using the buttons on your TV or remote control. 1. Press MENU to display the menu system. 2. Press x or • to select menu. 3. Press y or z to select an item, then press ENTER. 4. Press y or z to select or adjust a setting.
Introduction Changing the on-screen display language TV front panel CHANNEL VOLUME MENU EXIT TV/VIDEO TouchFocus Connecting your TV You can choose from three different languages (English, French and Spanish) for the on-screen display of adjustment menus and messages. To select a language: 1. Press MENU, and then press x or • until the SET UP menu appears. 2. Press y or z to highlight LANGUAGE, and then press ENTER to display the pull-down menu.
Adding channels to the TV’s memory Note: To tune the TV to a channel not programmed in the channel memory, you must use the Channel Number buttons on the remote control. TV / VIDEO INFO 1 2 3 4 5 6 8 7 0 C ZE SI IT EX R EN FAV T Setting tup your TV TV CBL/SAT VCR DVD ENTER : SET SET UP Usingr the TV’s Features LANGUAGE CLOCK SET ANT 1 / 2 TV / CABLE CH PROGRAM ADD / ERASE ENGLISH 00:00 ANT1 CABLE ADD ENTER : START o Appendix 6. Press ENTER to start channel programming.
Introduction Adding and erasing channels manually TV front panel TV / VIDEO POWER RECALL 2 3 4 5 6 7 8 9 CHRTN +10 0 NU ME ENT GU ID IT E FAV FA ZE SI VO R C MENU yzx • MENU DVDMENU CH CL E VOL POP DIRECT CH MUTE Channel yz SLEEP TV/VCR PAUSE REW FREEZE FF SPLIT SOURCE SKIP / SEARCH SWAP POP CH LIGHT CH SCAN REC STOP ENTER PLAY Using the TV’s Features To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons (0–9 and 100).
Adjusting the color convergence Connecting your TV I This projection TV uses three separate TV tubes: red, green, and blue. The red, green, and blue images are projected onto the screen where they converge to form a full-color picture. You can see a clear picture only when the three images converge correctly. Convergence may drift over time or if you move the TV. If you can see clear images on your TV screen, skip this procedure.
Introduction 6. Press y (up), z (down), x (left), or • (right) on the remote control to converge the red or blue line into the white line. TV / VIDEO POWER RECALL INFO 1 2 3 4 5 6 8 7 9 0 ENT GU ID FAV E PI C ZE SI TO P 100 NU ME E IT OR V FA MENU yzx • MENU DVDMENU EN EX IT TE R ER T FAV 7. If both red and blue need adjusting, you will need to perfrom steps 5 and 6 twice. 8. Press ENTER to display the cursor. 9. Repeat steps 4 to 8 to adjust another position. 10.
Introduction Using the TV’s features Connecting your TV Switching between two channels using Channel Return The Channel Return feature allows you to switch between two channels without entering an actual channel number each time. 1. Select the first channel (or video mode) you want to view. 2. Select a second channel using the Channel Number buttons (0–9, 100). 3. Press CH RTN. The previous channel will display.
Notes: • The FAV zy buttons operate as MENU zy buttons when a menu is onscreen. • The favorite channel feature is not available in ANT2 mode. FAVOR I TE CH CH ––– I NPUT ––– ––– ––– ––– ––– ––– Introduction 3. Press ENTER to display the FAVORITE CH menu. CH INPUT will be highlighted. ––– ––– ––– ––– ––– ––– TV CABLE Connecting your TV CLEAR ALL CUSTOM MENU 0–9 : SELECT ENTER : SET To select your favorite channels: Press FAV z or y.
INFO RECALL 1 2 3 4 5 6 7 8 9 0 ENT GU ID TE FAV RI C FA ZE SI TO P NU ME Channel Number CHRTN +10 100 VO Introduction POWER RECALL E Connecting your TV TV / VIDEO PI Labeling channels Channel labels appear above the on-screen channel number display each time you turn on the TV, change a channel, or press RECALL. You can choose any four characters to identify a channel. To create channel labels: 1. Press MENU, and then press x or • until the CUSTOM menu appears. 2.
1 2 3 4 5 6 9 0 ENT ZE yzx • EX R FAV TV CBL/SAT VCR DVD CH CL E ENTER VOL POP DIRECT CH MUTE SLEEP STOP PLAY PAUSE Using the Remote Control ER AR IT TE PIC SIZE MENU MENU DVDMENU EN Connecting your TV GU ID FAV SI TO P 100 NU ME TE RI VO FA E NATURAL THEATER W I DE 1 THEATER W I DE 2 THEATER W I DE 3 FULL Number CHRTN +10 T P I CTURE S I ZE : : : : : 8 7 TV/VCR 0 1 2 3 4 POWER INFO EN Selecting the picture size 1. Press PIC SIZE on the remote control. 2.
Introduction Connecting your TV Theater Wide 1 picture size (For 4:3 format program) • The picture is non-uniformly enlarged—the center of the picture remains close to its original proportion, but the left and right edges are stretched wider to fill the screen. • A small part of the picture at Theater Wide 1 picture size example the top and bottom is hidden; however, this mode cannot be scrolled.
TV / VIDEO RECALL 2 3 4 5 6 8 9 CHRTN ENT GU ID FAV SI ZE SAVE EN IT POP DIRECT CH MUTE SLEEP STOP PLAY SCROL L AD JUSTMENT 0 : TO ADJUST • To raise the picture, press y . SCROL L AD JUSTMENT +20 : TO ADJUST PAUSE ENTER VOL SPLIT FREEZE SOURCE Note: REW FF SKIP / SEARCH SWAP POP CH SCAN scroll YouCHcan the picture in Theater Wide 2 REC LIGHT and Theater Wide 3 only.
Aspect ratio of signal source Automatic aspect size (automatically selected when AUTO ASPECT is ON) 4:3 Normal Natural 16:9 Full 4:3 Letter box Not defined (no ID-1 data) Full Theater wide 2 • The AUTO ASPECT operates according to aspect information indicated in the digital signal of HDMI (not ID-1 signal).
The POP (picture-out-picture) feature splits the screen into a double window that allows you to watch two programs at the same time. The POP program can come from a TV broadcast or an external source, such as a VCR. To display a TV broadcast in the POP window: 1. Press SPLIT to display the POP window. Introduction Using the POP double-window feature Note: • The SPLIT buttons on the remote control operate the TV’s POP features.
Introduction Switching the main and POP pictures Press SWAP while you are using the POP feature to switch the main and POP pictures. Note: • The SAP channel will not be decoded when the speaker source is switched to POP. Even if SAP is selected in the menu (see page 53), the main audio channel will be heard when the speaker sound is switched to POP.
Introduction Double-Window aspect ratio The Double-Window feature displays each picture according to its input signal aspect ratio, as illustrated below. Note: • The AUTO ASPECT feature (page 34) does not operate in double-window mode. • Aspect ratio is the ratio of width to height POWER RECALL TV / VIDEO of the picture.
Introduction TV / VIDEO INFO 1 2 3 4 5 6 8 7 0 TO P 7 8 9 GU ID FAVORITE ZE SI 5 ENT FAV C 4 NU ME E IT OR V FA PI 3 9 CHRTN +10 100 Moving picture purple 2 POWER RECALL E Connecting your TV Using the favorite channel search function You can use the favorite channel search function to quickly scan your favorite channels (see “Programming your favorite channels” on page 28). 1. Press FAVORITE.
Introduction Using the LOCKS menu Entering the PIN code 1. Press MENU, and then press x or • until the LOCKS menu appears. Note: The V-Chip function is available only for the U.S. V-Chip system. The Canadian V-Chip system is not supported.
Introduction ENABLE BLOCKING 1. From the LOCKS menu, press z or y to highlight V-CHIP, and then press ENTER. The V-CHIP menu appears. 2. Press z or y to highlight ENABLE BLOCKING, and then press ENTER. Connecting your TV V – CH I P ENABLE BLOCK I NG TV RAT I NG MPAA RAT I NG BLOCK I NG OPT I ON LOCKS MENU : SELECT LOCKS menu LOCKS V - CH I P CH LOCK V I DEO LOCK NEW P I N CODE OFF ON OFF : MOVE ENTER : START E N T E R : SET 3. Press y or z to select ON or OFF.
MPAA RAT I NG X NC17 R PG13 PG MPAA RAT I NG V – CH I P MENU : MOVE X X G X : SELECT Introduction V-CHIP menu V – CH I P ENABLE BLOCK I NG TV RAT I NG MPAA RAT I NG BLOCK I NG OPT I ON LOCKS MENU : MOVE ON Connecting your TV MPAA RATING (Independent rating system for movies) 1. From the V-CHIP menu, press z or y to highlight MPAA RATING, and then press ENTER. MPAA RATING menu appears. 2. Press y or z to highlight MPAA RATING. 3. Press • to lock (“X”) or press x to unlock (“✓”).
Introduction Unlocking programs temporarily 1. If you try to watch a TV program that exceeds the rating limits you set, the TV enters program lock mode. After 4 seconds, the TV starts the auto favorite channel search function (see page 38). You can either unlock the program temporarily (see steps 2-4) or select a non-locked program to watch.
Introduction TV / VIDEO ENTER : CLEAR 2 3 4 5 6 8 7 9 CHRTN +10 0 ENT GU ID TE FAV E FA Z SI VO RI E TO P 100 NU ME C PI 3. Repeat step 2 for other channels. To unlock all locked channels at once: Press y or z to highlight CLEAR ALL, and then press ENTER.
Introduction Locking the video inputs TV / VIDEO POWER RECALL INFO 1 2 3 4 5 6 8 7 9 CHRTN +10 TO P IT TE EX Using the Remote Control Setting up your TV yz ZE SI :: SELECT V I DEO V I DEO+ OFF C LOCKS V - CH I P CH LOCK V I DEO LOCK NEW P I N CODE E : Unlocks all video input sources. GU ID EN R ER FAV T OFF ENT FAV MENU DVDMENU EN Note: Make sure the main and POP windows are not currently tuned to channel 3 or 4 or one of the video modes.
Introduction Adjusting the picture Picture Quality Sports Standard Movie Preference Bright and dynamic picture (factory setting) Standard picture setting (factory setting) Movie-like picture setting (factory setting) Your personal preference* *(see “Saving new preference” on page 46.) To select the picture mode: 1. Press MENU, and then press x or • until the PICTURE menu appears. 2. Press z or y to highlight MODE, and then press ENTER. 3. Press z or y to select the mode you prefer, then press ENTER.
Introduction Connecting your TV Saving new preference You can save the PICTURE qualities (contrast, brightness, color, tint, sharpness, color temperature and CableClear DNR) you adjusted in the picture preference mode. To save your new preferences: 1. Press MENU, and then press x or • until the PICTURE menu appears. 2. Press y or z to highlight PICTURE SETTINGS, and then press ENTER. PICTURE SETTINGS menu appears. 3. Press yzx • to highlight SAVE, and then press ENTER.
1 2 3 4 5 6 8 7 ENT GU ID FAV E C ZE SI MENU yzx • MENU DVDMENU EN EX R T FAV CH AR IT TE ER CL E POP DIRECT CH MUTE SLEEP STOP PLAY PAUSE ENTER VOL Using the Remote Control TO P Connecting your TV 0 100 NU ME TE RI VO FA TV/VCR SAVE 9 CHRTN +10 EN SPLIT FREEZE SOURCE Note: REW FF SKIP / SEARCH SWAP POP CH CH SCAN When in ColorStream or HDMI mode, REC LIGHT “CableClear DNR” display will change to “DNR”. DNR is not selectable in the HDMI mode. ENTER : SELECT 4.
1 2 3 4 5 6 8 7 9 CHRTN +10 1080 i 540p 0 TO P 100 NU ME TE RI VO FA ENT GU ID FAV ZE SI SAVE MENU yzx • MENU DVDMENU ENTER : SET EN Using the Remote Control Setting up your TV RESET : SELECT ENTER : SET Index Appendix Using the TV’s Features To set the CINEMA MODE to VIDEO (off ): Press y or z to select VIDEO in step 3 above.
Introduction Selecting the video input source SOURCE SELECT I ON ANT 1 V I DEO 1 V I DEO 2 V I DEO 3 ANT 1 V I DEO 1 V I DEO 2 V I DEO 3 HDM I ANT 2 HDM I ANT 2 Color Stream HD1 Color Stream HD2 Color Stream HD1 Color Stream HD2 0- 7 : TO SELECT Pressing TV/VIDEO on the remote control displays the current signal source (press TV/VIDEO again or 0-7 to change) TV / V I DEO : TO SELECT Pressing TV/VIDEO on the TV changes the current signal source Labeling the video input sources The video label fe
Introduction Using the closed caption feature TV / VIDEO INFO 1 2 3 4 5 6 8 7 ENT GU ID IT E FAV FA V ZE SI OR C MENU yzx • MENU DVDMENU ENTER : SET IT EX 4. Press y or z to highlight CAPTION or TEXT, and then press ENTER. ER TV CBL/SAT VCR DVD FAV CH CL Setting up your TV : SELECT C1 C2 C3 C4 Using the TV’s Features • To view captions, highlight CAPTION in step 4 above, and then highlight C1, C2, C3, or C4 (C1 displays translation of the primary language in your area).
Introduction Setting the ON timer TV / VIDEO POWER RECALL POWER INFO 1 2 3 4 5 6 7 8 9 CHRTN +10 0 ENT GU ID IT E FAV E FA V ZE SI OR C MENU yzx • MENU DVDMENU IT EX FAV CH CL 5. Press POWER to turn off the TV. The TV will turn on automatically after the length of time you set in the ON Timer. Setting the sleep timer To set the sleep timer to turn the TV off automatically: 1. Press SLEEP to set the length of time until the TV turns off.
Introduction Setting the clock Connecting your TV To set the clock: 1. Press MENU, and then press x or • until the SET UP menu appears. 2. Press y or z to highlight CLOCK SET, and then press ENTER. 3. Press the Number buttons (0-9) to enter the correct time. The clock operates on a 24-hour cycle. 4. Press ENTER to start the clock. Note : If the TV’s power source is interrupted (the power cord is unplugged or a power failure occurs), the clock must be reset.
Introduction Adjusting the sound INFO → Normal → 1/2 MUTE → MUTE 2 3 4 5 6 8 7 9 CHRTN +10 0 NU ME E IT OR V FA ENT GU ID FAV E C ZE SI TO P 100 MENU yzx • MENU DVDMENU EN EX IT TE R ER T FAV TV CBL/SAT VCR DVD AR EN CL CH E POP DIRECT CH MUTE SLEEP STOP PLAY TV/VCR PAUSE REW FREEZE FF SPLIT SOURCE SKIP / SEARCH SWAP POP CH LIGHT CH SCAN REC ENTER VOL MUTE TV front panel MENU VOLUME CHANNEL Setting up your TV Selecting stereo/SAP broadcasts The multi-
Introduction Note: If the broadcast is monaural, the WOW SRS 3D surround sound effect will not work.
1 2 3 4 5 6 8 7 GU ID ZE SI MENU yzx • MENU DVDMENU EN R FAV TV CBL/SAT VCR DVD AR EX IT TE ER CL CH E POP DIRECT CH MUTE SLEEP STOP PLAY TV/VCR PAUSE REW FREEZE FF SPLIT SOURCE SKIP / SEARCH SWAP POP CH LIGHT : ADJUST TV / VIDEO POWER RECALL INFO 1 2 3 4 5 6 8 7 9 CHRTN +10 0 ENT GU ID FAV E C MENU yzx • MENU DVDMENU EN FAV E POP DIRECT CH MUTE SLEEP STOP PLAY TV/VCR PAUSE REW FREEZE FF SPLIT SOURCE SKIP / SEARCH SWAP POP CH LIGHT CH SCAN
Introduction Connecting your TV Turning off the built-in speakers Use this feature to turn the TV speakers off when you connect an audio system (See “Connecting an audio system” on page 16). To turn off the built-in speakers: 1. Press MENU, then press x or • until AUDIO menu appears. 2. Press y or z to highlight SPEAKERS, and then press ENTER. 3. Press y or z to select OFF, and then press ENTER. Note: Make sure the volume control of your audio amplifier is set to a moderate listening level.
Introduction Selecting the background of the menu display POWER RECALL INFO RECALL 1 2 3 4 5 6 8 7 9 CHRTN +10 0 ENT GU ID FAV E C ZE SI MENU yzx • MENU DVDMENU EX IT TE R ER FAV TV CBL/SAT VCR DVD ENTER : SET Displaying on-screen information CH AR SHADED SOL I D T : SELECT EN EN CUSTOM ON T I MER SLEEP T I MER CC FAVOR I TE CH CH LABEL I NG V I DEO LABEL BACKGROUND CL E POP DIRECT CH MUTE SLEEP STOP PLAY TV/VCR PAUSE REW FREEZE FF SPLIT SOURCE SKIP / SEARCH S
Introduction Appendix Specifications • Design and specifications are subject to change without notice. Connecting your TV WARNING: RISK OF ELECTRIC SHOCK ! Never attempt to service the TV yourself. Opening and removing the covers may expose you to dangerous voltage or other hazards. Refer all servicing to a Toshiba Authorized Service Center.
Introduction Troubleshooting Symptom TV will not turn on Solution • Make sure the power cord is plugged in, then press POWER. • The remote control batteries may be dead. Replace the batteries. No picture, no sound • Check the antenna/cable connections. No sound, picture OK • • • • Poor picture, sound OK • Check the antenna connections. • The station may have broadcast difficulties. Try another channel. • Adjust the PICTURE menu.
Introduction Limited United States Warranty for 27'' FST PURE® and All Larger Television Models Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties to original consumers in the United States. Connecting your TV THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. PRODUCTS PURCHASED IN THE U.S.A.
Introduction Limited Canada Warranty for 32'' and Larger Television Models Limited Two (2) Year Warranty on Picture Tube* TCL warrants the picture tube in this television against defects in materials or workmanship for a period of two (2) years after the date of original retail purchase. DURING THIS PERIOD, TCL WILL, AT TCL’S OPTION, REPAIR OR REPLACE A DEFECTIVE PICTURE TUBE WITH A NEW OR REFURBISHED PICTURE TUBE WITHOUT CHARGE TO YOU.
Introduction Index BACKGROUND selection ................................................ 57 Back of the TV ........................................................................ 7 Picture adjustments COLOR TEMPERATURE ..............................................46 Picture mode .................................................................... 45 Picture quality .................................................................. 45 Picture-out-picture (POP) CH SCAN button ............................
Index Appendix Using the TV’s Features Setting up your TV Using the Remote Control Connecting your TV Introduction Note 63
HEAD OFFICE: 82 TOTOWA ROAD, WAYNE, NJ 07470, U.S.A. NATIONAL SERVICE DIVISION:1420-B TOSHIBA DRIVE, LEBANON, TN 37087, U.S.A. HEAD OFFICE: 191 McNABB STREET, MARKHAM, ONTARIO, L3R 8H2, CANADA – TEL: (905) 470-5400 SERVICE CENTERS: TORONTO: 191 McNABB STREET, MARKHAM, ONTARIO L3R 8H2, CANADA – TEL: (905) 470-5400 MONTREAL: 18050 TRANS CANADA, KIRKLAND, QUEBEC, H9J 4A1, CANADA – TEL: (514) 390-7766 VANCOUVER: 22171 FRASERWOOD WAY, RICHMOND, B.C.