CMOS Color Camera Instruction Manual

ManualsBrandsToshiba ManualsDigital CameraCMOS Color Camera IK-HR1D

For Customer Use

Enter below the Serial #

which is located on the

bottom of the cabinet. Retain

this information for future ref-

erence.

Model # IK-HR1D

Serial #

CMOS COLOR CAMERA

INSTRUCTION MANUAL

FCC NOTICE

This equipment has been tested and found to comply with the limits for a Class A digital device, pursu-

ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

USER-INSTALLER CAUTION: Your authority to operate this FCC verified equipment could be voided if

you make changes or modifications not expressly approved by the party responsible for compliance to

Part 15 of the FCC Rules.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est comforme à la norme NMB-003 du Canada.

Following information is only for EU-member states:

The use of the symbol indicates that this product may not be treated as household waste.

By ensuring this product is disposed of correctly, you will help prevent potential negative

consequences for the environment and human health, which could otherwise be caused by

inappropriate waste handling of this product. For more detailed information about the take-

back and recycling of this product, please contact your supplier where you purchased the

product or consult.

This manual is made from recycled paper.

IK-HR1D

IK-HR1D_EN.indd 1IK-HR1D_EN.indd 1 2008/08/12 15:56:482008/08/12 15:56:48

Summary of content (28 pages)

PAGE 1
CMOS COLOR CAMERA INSTRUCTION MANUAL IK-HR1D For Customer Use Enter below the Serial # which is located on the bottom of the cabinet. Retain this information for future reference. Model # IK-HR1D Serial # FCC NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
PAGE 2
SAFETY PRECAUTIONS Safety icons This manual contains safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and the icons highlight these instructions as follows: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
PAGE 3
Note the following instructions when installing. • Do not cover the product with any material. • Do not place the product on any inflammable material such as a carpet or blanket. • Do not place the product in a confined space, as this may cause heat to build up inside the product. Failure to follow the above cautions may result in fire. Do not place the product in direct sunshine and/or high temperature. Temperature build up inside the product may result in fire.
PAGE 4
Limitation of Usage The product is not designed for any “critical applications.” “Critical applications” means life support systems, exhaust or smoke extraction applications, medical applications, commercial aviation, mass transit applications, military applications, homeland security applications, nuclear facilities or systems or any other applications where product failure could lead to injury to persons or loss of life or catastrophic property damage.
PAGE 5
(6) OPTION....................................................................................................................... (6.1) Changing a type of output monitors .................................................................... (6.2) Changing I/P MODE ........................................................................................... (6.3) Changing RS 232C baud rate ............................................................................ (7) Returning to factory settings ............
PAGE 6
1. CAUTIONS ON USE AND INSTALLATION • • Handling the unit. • Install the camera in a location free from noise. If the camera or the cables are located near power utility lines or a TV, etc. undesirable noise may appear on the screen. In such a case, try to change the location of the camera or the cable wiring. • Moire A moire pattern is an interference pattern generated when two repetitive line patterns overlap. This is not a malfunction.
PAGE 7
3. NAMES AND FUNCTIONS 2 DC IN 12V terminal 1 Prism faceplate 4 DISP button 6 MENU UP button 8 DATA UP (AWB) button 9 DATA DOWN button 7 MENU DOWN button 5 PAGE button 10 DVI-I terminal 3 REMOTE terminal [ Front ] 11 [ Rear ] 12 [ Bottom ] 㽲 Prism faceplate The protection cap is attached on the lens mount portion. After removing the cap, mount the lens. Be careful not to scratch or touch the optical area. 㽳 DC IN 12V terminal Accepts a DC power input (12V).
PAGE 8
4 CONNECTION 4 1 Standard Connection Lens (option) DVI terminal DVI cable (not supplied) DVI monitor (not supplied) IK-HR1D DC IN 12V Less than 11 mm [0.433”] DC power supply (option) 4 2 Cautions on Connection 䊶 When connecting the camera cables, be sure to turn off the CMOS color camera and any other equipment connected to it. 䊶 For DC power supply connecting to DC IN 12V terminal, use UL listed and/or CSA approved ungrounded type AC adaptor with the specifications described below.
PAGE 9
4 3 Connection on Rear Panel Rear panel view 㪩㪜㪤㪦㪫㪜 1 2 4 3 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 C1 C3 C2 C4 C5 4.
PAGE 10
5 OPERATION 㽲 Refer to the item "4. CONNECTION", and connect the equipment correctly. 㽳 Turn on the connected equipment and the camera. 㽴 Aim the lens at the object, adjust the lens iris adjustment, focus adjustment, etc. 㽵 Refer to the item “5.1 White Balance”, make the adjustment. 㽶 Refer to the items “5.2 Gain”, “5.3 Switching I/P mode”, “7. MODE SETTING BY THE ON SCREEN DISPLAY”, select the necessary items.
PAGE 11
Display Meaning AWB OK Automatic white balance adjustment finished correctly. AWB NG Automatic white balance adjustment cannot be performed because the video level is too low. Adjust the video level by increasing the illumination or opening the lens iris. LEVEL LOW AWB NG LEVEL HIGH AWB NG C. TEMP LOW Automatic white balance adjustment cannot be performed because the video level is too high. Adjust the video level by decreasing the illumination or closing the lens iris.
PAGE 12
5 2 Gain When the image is dark even if the lens iris is open, change the gain (video gain) to get the desired video level. For gain adjustment of the unit, MANUAL (Manual), OFF (0 dB) modes are provided. Select the mode on the GAIN menu. (Refer to the item “7.3 (2) GAIN (Video gain)”.) (1) MANUAL(Manual gain) Gain adjustment is performed on the GAIN menu. The adjustment range is from 0 to 12dB in 1dB steps. (Refer to the item “7.3 (2) (2.1) Changing gain in MANUAL mode”.) (2) OFF Gain is fixed at 0 dB.
PAGE 13
6 ITEMS CONTROLLED BY THE ON SCREEN DISPLAY Item Available selections Electronic shutter MODE AUTO level AUTO peak : average AUTO response speed AUTO area Gain White balance Process Matrix color correction AUTO, MANUAL, SS -100 0 100 00 10 05 05 10 00 1 10 20 PRESET A, PRESET B, PRESET C, PRESET D, PRESET E MANUAL speed OFF, 1/100s, 1/125s, 1/250s, 1/500s, 1/1000s 1/2000s, 1/4000s, 1/8000s, 1/16000s, 1/32000s Syncro.
PAGE 14
7 MODE SETTING BY THE ON SCREEN DISPLAY Various settings can be controlled on the unit by using the on screen menu displayed on the monitor. The contents once set are memorized in the scene files (A, B, C, D, E) selected, so if the power turns off, it is unnecessary to set the values again when using the unit next time. When the setting is performed, select the menu of the item to be set. 7 1 Using the Menus When the unit is powered on, the normal screen showing only the video signal appears.
PAGE 15
7 3 Menus 䊶 Select the menu to change the setting by referring to the item “7.1 Using the Menus”. 䊶 When the [MENU UP], [MENU DOWN] buttons are pressed, the “㸢” on the screen moves up and down. Move the “㸢” to the item whose setting you wish to change. 1 SHUTTER䋨䋨Electronic shutter䋩 The electronic shutter has three modes; AUTO, MANUAL, SS(Synchro Scan). Press the “Page” button to enter the Shutter Page. Use the “Data Up/Down” buttons to select the Shutter Mode.
PAGE 16
(b) Changing the automatic shutter detection (ratio between peak and average value) 㽲 Move the “㸢” to PEAK/AVE by pressing [MENU UP], [MENU DOWN] buttons. 㽳 Select the ratio between peak and average value by presshing [DATA UP], [DATA DOWN] buttons. (Peak:Average) The peak value increases by pressing [DATA UP] 00:10 05:05 10:00 The peak value decreases by pressing [DATA DOWN] (c) Changing the automatic shutter response speed 㽲 Move the “㸢” to SPEED by pressing [MENU UP], [MENU DOWN] buttons.
PAGE 17
䋨 1䋮䋮2䋩䋩 Changing the setting in MANUAL mode Move up and down by pressing MENU UP,DOWN Select the desired value by pressing DATA UP,DOWN Shutter mode -- 1 SHUTTER -- MODE MANUAL AUTO, MANUAL, SS Shutter speed setting OFF, 1/100s, 1/125s, 1/250s, 1/500s, 1/1000s, 1/2000s, 1/4000s, 1/8000s, 1/16000s, 1/32000s MANUAL OFF < MODE = MANUAL> (a) Changing the shutter speed 㽲 Move the “㸢” to MANU by pressing [MENU UP], [MENU DOWN] buttons.
PAGE 18
2 GAIN (Video gain) GAIN has two modes; MANUAL, OFF. Move the “㸢 ” to MODE, press the [DATA UP], [DATA DOWN], and select one of the two modes : MANUAL, OFF. In the OFF mode, gain is fixed to 0dB.
PAGE 19
(a) Changing R PAINT 㽲 Move the “㸢” to R PAINT by pressing [MENU UP], [MENU DOWN] buttons. 㽳 Select the desired value of red paint by pressing [DATA UP], [DATA DOWN] buttons. [DATA UP] -10 Red is decreased. ‫ޓ‬Red is increased. 0 10 ‫[ ޓ‬DATA DOWN] (b) Changing B PAINT 㽲 Move the “㸢” to B PAINT by pressing [MENU UP], [MENU DOWN] buttons. 㽳 Select the desired value of blue paint by pressing [DATA UP], [DATA DOWN] buttons. [DATA UP] -10 Blue is decreased. ‫ޓ‬Blue is increased.
PAGE 20
䋨 3䋮䋮2䋩䋩 Changing the setting in ATW(Automatic Tracking White balance) mode Move up and down by pressing MENU UP,DOWN -- 3 Select the desired value by pressing DATA UP,DOWN WHT BAL -- MODE R PAINT B PAINT White balance mode AWB, ATW, MANUAL R PAINT adjustment -10 to 10 B PAINT adjustment -10 to 10 ATW 0 0 (a) Changing R PAINT 㽲 Move the “㸢” to R PAINT by pressing [MENU UP], [MENU DOWN] buttons. 㽳 Select the desired value of red paint by pressing [DATA UP], [DATA DOWN] buttons.
PAGE 21
䋨 3䋮䋮3䋩䋩 Changing gain in MANUAL mode Move up and down by pressing MENU UP,DOWN -- 3 Select the desired value by pressing DATA UP,DOWN WHT BAL -- MANUAL 0 0 3200k MODE R GAIN B GAIN C TEMP White balance mode AWB, ATW, MANUAL Red gain adjustment -100 to 100 Blue gain adjustment -100 to 100 Color temperature setting 3200K, 5600K (a) Changing the red gain 㽲 Move the “㸢” to R GAIN by pressing [MENU UP], [MENU DOWN] buttons.
PAGE 22
䋨4䋩䋩 PROCESS Move up and down by pressing MENU UP,DOWN Select the desired value by pressing DATA UP,DOWN Gamma correction -- 4 PROCESS -- GAMMA ON/OFF GAMMA DTL GAIN DTL B.FRQ M PED ON, OFF Gamma correction level setting Detail gain setting ON 0 0 HIGH 0 -10 to 10 -7 to 7 Detail boost frequency Master pedestal setting HIGH, NORMAL, LOW -128 to 127 䋨 4䋮䋮1䋩䋩 Changing gamma correction ON/OFF 㽲 Move the “㸢” to GAMMA ON/OFF by pressing [MENU UP], [MENU DOWN] buttons.
PAGE 23
䋨 4䋮䋮3䋩䋩 Changing detail (outline) gain 㽲 Move the “㸢” to DTL GAIN by pressing [MENU UP], [MENU DOWN] buttons. 㽳 Select the desired value of the detail gain by pressing [DATA UP], [DATA DOWN] buttons. ‫ޓ‬The detail increases. [DATA UP] -7 The detail decreases. 0 7 ‫[ ޓ‬DATA DOWN] 䋨 4䋮䋮4䋩䋩 Changing DTL B.FRQ (detail boost frequency) 㽲 Move the “㸢” to DTL B.FRQ by pressing [MENU UP], [MENU DOWN] buttons. 㽳 Select the detail boost frequency by pressing [DATA UP], [DATA DOWN] buttons.
PAGE 24
䋨5䋩䋩 MATRIX(Matrix color correction) Move up and down by pressing MENU UP,DOWN Red hue setting -- 5 MATRIX -- Red gain setting MATRIX ON Green hue setting R R G G B B 0 0 0 0 0 0 Green gain setting Blue hue setting Select the desired value by pressing DATA UP,DOWN HUE GAIN HUE GAIN HUE GAIN Matrix color correction ON, OFF Yellow hue setting Yellow gain setting Ye Ye Cy Cy Mg Mg HUE GAIN HUE GAIN HUE GAIN 0 0 0 0 0 0 Blue gain setting Cyan hue setting Cyan gain setting Magenta h
PAGE 25
䋨6䋩䋩 OPTION Move up and down by pressing MENU UP,DOWN -- 6 OPTION Select the desired value by pressing DATA UP,DOWN -- MONITOR PC MONITOR PC, TV I/P MODE 1080p I/P MODE 1080p, 1080i BAUD RATE 9600bps RS232C baud rate 9600bps, 19200bps 䋨 6䋮䋮1䋩䋩 Changing a type of output monitors 㽲 Move the “㸢” to MONITOR by pressing [MENU UP], [MENU DOWN] buttons. 㽳 Select either PC or TV by pressing [DATA UP], [DATA DOWN] buttons. 䊶 PC: When using PC as an output monitor.
PAGE 26
8.
PAGE 27
10. EXTERNAL APPEARANCE DIAGRAM Unit : mm [inch] 26 [1.02] 2-M3 Depth 3 [0.118] 7.8 [0.31] 5 [0.2] 78 [3.07] 10.65 [0.42] 44 [1.73] 22 [0.87] 44 [1.73] 32.51[1.28] #4-40UNC [Front] [Rear] 56 [2.2] 4-M2 Depth 3 [0.118] 4-M3 Depth 3 [0.118] 26 [1.02] 25 [0.98] 26 [1.02] 5 [0.2] 25 [0.98] 25 [0.98] 27 IK-HR1D_EN.
PAGE 28
Limited Warranty – TOSHIBA CMOS Color Camera The Imaging Systems Division of Toshiba America Information Systems, Inc. ("ISD") makes the following limited warranties with regard to this CMOS color Camera ("Product"). These limited warranties extend to the Original End-User ("You[r]"). One (1) Year Limited Warranty of Labor and Parts ISD warrants that this Product will perform in accordance with specifications for a period of one (1) year from the date of purchase by the Original End-User.