User's Manual

English - 14 -
English
Connecting External Equipment
Before connecting any external equipment, remove the mains plug from the wall socket.
Aerial cable:...........................................................
Connect the aerial to the ANT. socket on the rear of the
television.
SCART lead:..........................................................
If you use a decoder* or a media recorder, it is essential that
the scart cable is connected to the television.
Before running fi rst time installation, any connected devices
need to be set to standby mode.
The SPDIF Coax. OUT socket enables the connection of a
suitable surround sound system.
Ethernet (LAN) Input is used for MHEG return channel (future
service, currently under development by broadcaster).
HDMI® (High-Defi nition Multimedia Interface) is for using
with a DVD decoder or other equipment with digital audio and
video output. It is designed for best performance with 1080i
and 1080p high-defi nition video signals but will also accept
and display VGA, 480i, 480p, 576i, 576p and 720p signals.
PC format signals will also be displayed.
NOTE: Although this television is able to connect to HDMI
equipment, it is possible that some equipment may not
operate correctly.
A wide variety of external equipment can be connected to the
television; therefore, the relevant owner’s manuals for all addi-
tional equipment must be referred to for exact instructions.
If the television automatically switches over to monitor
external equipment, return to normal television by pressing
the desired programme position button. To recall external
equipment, press SOURCE button repeatedly to switch
between sources.
Important Notice: Side USB Input 1 is for service use only.
Note that this USB connector does not have any other func-
tions such as playing audio or picture fi les.
Side USB input 2 is available in analogue TV mode. You
can use Media Browser screen to browse a connected
USB disk.
LAN
EXT2
EXT1
HDMI Input
Sockets
VGA
Input
SCART
Sockets
ANT. (Aerial)
Input
COMMON INTERFACE
The Common Interface is
for a Conditional Access
Module (CAM).
For service use only.
Headphone
SIDE AV Video Input
SIDE AV Audio Inputs
SPDIF
Coaxial Out
Side View
S-VHS Input
USB Input
TV
* a decoder
could be Digital
Satellite, Free to
Air or any other
compatible
decoder.
decoder*
SERVICE
SERVICE
5Vdc-Max500mA 5Vdc-Max500mA
Component
Audio
Inputs
Component
Video (YPbPr)
Inputs
Subwoofer Out
Line Out
Ethernet input
HDMI Input 3
On/Off Switch
SPDIF
32&40BV801B_MB38_[GB]_(IB_INTERNET)_DVB-T2_(3910UK)_10073217_10073218.indd 1432&40BV801B_MB38_[GB]_(IB_INTERNET)_DVB-T2_(3910UK)_10073217_10073218.indd 14 03.10.2011 18:52:4803.10.2011 18:52:48