User's Manual

- 19 -
Initial Installation
Before switching on the television put your decoder and media recorder to Standby if they are connected
and ensure the aerial is connected to your television. To set up the television use the buttons on the remote
control as detailed on page 13.
IMPORTANT: Ensure that the aerial is connected and
a Common Interface module is not inserted before
switching on the TV for the fi rst time installation.
Connect the mains plug and switch the TV into 1.
on using the side standby switch. If the TV does
not switch on, press any numbered or standby
button on the remote control, then the language
selection menu will be displayed. This screen will
appear the fi rst time that the television is switched
on and each time the television is reset.
By pressing the 2. Up or Down buttons highlight the
language you want to set and press OK button.
The following message will be displayed next:
By pressing 3. Left or Right button, select the
country you want to set and press Down button
to highlight the Search Type option. Use Left or
Right to set the desired search type. Available
search types are Digital and analog, digital only
and analog only.
When set, 4. Down buton to select Teletext
Language. Use Left or Right button to select
desired Teletext Language.
Press 5. OK button on the remote control to continue
and the following message will be displayed on
the screen:
Select 6. Yes by using Left or Right buttons and
press OK to continue.
The Auto tuning screen will appear and the 7.
television will start to search for available stations.
The progress bar will move along the line. You
must allow the television to complete the search.
Tthe following OSD will be displayed on the
screen and the television will search for digital
and analogue TV broadcasts:
Note: You can press MENU button to cancel.
After all the available stations are stored, Channel •
List will be displayed on the screen. If you like the
sort channels, according to the LCN, please select
Yes and then press OK (if available).
Press • OK button to quit channel list and watch TV.
Note:
Do not turn off the TV while initializing fi rst time •
installation.
40BV702B_40BV705B_MB65_[GB]_(IB_INTERNET)_DVB-T_(3910UK)_10075900_10076100.indd 1940BV702B_40BV705B_MB65_[GB]_(IB_INTERNET)_DVB-T_(3910UK)_10075900_10076100.indd 19 21.01.2012 17:57:3321.01.2012 17:57:33