Blu-ray DiscTM player BDX1500KB Owner’s Manual 1
Contents 1 Important.................................................................................................3-5 Safety and important notice................................................................................ 3 English Disposal of your old product and batteries........................................................ 3-4 Notice for Trademark ......................................................................................... 5 2 Your Product..........................................
1 Important Warning: • Risk of overheating! Never install the product in a confined space. Always leave a space of at least 10cm around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product. • Never place the product, remote control or batteries near naked flames or other heat sources, including direct sunlight. Only use this product indoors. Keep this • product away from water, moisture and liquid-filled objects.
country, please visit our website (http://www.recycle-more.co.uk/) or alternatively please contact your retailer where the product was purchased. English Disposal of batteries and/or accumulators The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators must be collected and disposed of separately from household waste.
Notice for Trademark English AVCHD Related Logos are trademarks of Panasonic Corporation and Sony Corporation. Blu-ray DiscTM, BONUSVIEWTM, and the logos are trademarks of the Blu-ray Disc Association. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.
2 Your Product Region Regions codes English Both the Blu-ray DiscTM Player and the discs are coded by region. These regional codes must match in order to play the disc. If the codes do not match, the disc will not play. The Region Number for this Blu-ray DiscTM Player is described on the rear panel of the Blu-ray DiscTM player. Region U.S.A. and Canada regions U.K.
Product overview 1 2 3 4 5 6 7 English Front panel (Sample Illustra on) Front panel controls Item Description Function 1 Disc compartment Load a disc into the disc drive. 2 IR Sensor Point the remote control at the IR sensor. 3 USB jack Connect a USB flash drive. 4 Open or close the disc compartment. 5 Stop playback. 6 Playback/pause. 7 Turn the power on (indicator glows green) or restore the unit to the standby mode (indicator is off).
Remote control English Opens/Closes the disc tray Number Buttons Selects numbered items in a menu Enters track/chapter/title numbers/password directly OSC Accesses the On Screen Control menu HOME Backs to local menu cursor focus on the disc icon OK A c k n o w l e d g e s / C o n fi r ms menu selection Navigation/Cursor buttons for moving to the left /right/ up/down during JPEG Press playback to rotate the current photo track, but the JPEG playback will be paused BACK Returns to previous menu TOP MENU Dis
3 Connections Connecting USB device Connecting to a TV Connect a HDMI cable from the HDMI output jack on this product to the HDMI input jack on the TV. A HDMI cable carries both video and audio signals. If you wish to use TV speakers, you do not need to make an additional audio connection. Connect the USB device to the front side of the player. The USB input supports USB flash drives (some Flash drives may not be compatible).
4 Preparation Setting up the player Always follow the instructions in this chapter in sequence. English Note: - Use of controls or adjustments or performance of procedures other than herein may result in hazardous radia on exposure or other unsafe opera on. Prepare the remote control Find the correct viewing input 1. Press to turn on this product. 2. Turn on the TV and switch to the correct video-in input (refer to the TV user manual on how to select the correct input).
Playback Functions Basic Playback 1. Press button on the front panel or the remote control, your Blu-ray Disc™ player will turn on. The unit will take around 20 seconds to warm up. When the power supply is first switched on, the setting of the Power Down Mode is in Normal mode. 2. Turn on the TV, and then select the input setting on the TV that matches the connection method you used to connect your player. 3. Press to slide out the disc tray. 4.
English GOTO During playback, 1. Press the GOTO button to edit Title, Chapter, and Time. 2. Press / and OK button on the remote control to select Title, Chapter, or Time. 3. Press the numeric buttons or / and then press OK. The playback will skip to the desired location. 4. For Time Search, press / to select TT (Title) or CH (Chapter) time search. 3. Press the POP UP/MENU button, a pop up menu will appear, then press and OK / button to select "Add to Playlist" to add the files to the Playlist.
AUDIO Press the AUDIO button on the remote control to select the audio streams that set within the Blu-rayTM or DVD disc. The screen will display: AUDIO: X / XX XXX XXXX “X” - The current audio stream number “XX” - The total number of audio streams “XXX” - Audio Language “XXXX” - Audio Technology ANGLE During playback, press this button to change the angle of the picture. The screen will display “Angle X/X.
Primary video English Secondary video with Secondary Audio (Sample Illustra on) PIP view func on This function is not available when the primary video is played in Search, Slow-Motion, or Frame-by-Frame or Fast Forward/ Reverse mode. To listen to the secondary audio, the digital audio output must be set to “Bitstream”, “Re-encode” or “PCM”. Otherwise, only the primary audio can be heard. Notes: - Not all the Blu-ray™ discs can support this func on. - High Defini on PIP (Secondary Video) is not supported.
This section describes the various setting option of this Blu-ray DiscTM player. [HDMI] When you connected a HDMITM device to the HDMI OUT jack, the available options are: {Bitstream} - Selects Bitstream output if your receiver HDMI IN supports Dolby® or DTS® or PCM audio signal. {PCM} - Selects PCM output if your receiver HDMI Press the SETTING button in stop mode to IN only supports PCM audio signal. display the setup screen. {Re-encode} - Selects Re-encode if your Press OK to enter the Setting menu.
English [Screen Saver] The screen saver helps protect the TV screen. You can turn on/off the screen saver mode. {On} - Set the screen saver active after approximately 5 minutes without operation. - The unit will switch to standby mode if there is no operation after the screen saver is engaged for approximately 20 minutes. {Off} - Turn off the screen saver mode. [Disc Auto Play] Turn On or Off the disc automatic playback switching mode. {On} - The disc playback automatically after loading.
Information Setting 1. In Setting menu, use / to select Information and press OK. 2. The current Software Version will be displayed. 3. Press or the BACK button to return to the previous menu. Playback Setting 1. In Setting menu, use / to select Playback and press OK. 2. Press / to select an option and press OK. 3. Use / to select On/Off, and press OK to confirm. 4. Press or the BACK button to return to the previous menu.
progressive frames/second of video. If the TV cannot display this frame rate, you need to turn off HDMI 1080/24p. {On} - Enable 1080/24p video resolution setting. {Off} - Disable 1080/24p video resolution setting. English Notes about HDMI 1080/24p: If you want the 1080/24p output, it should fulfill below 3 condions: 1. TV supports the 1080/24p display; 2. Player choose the 1080/24p opon in the seng menu; 3. Media must be the 1080/24p video.
7 Specifications Video Signal system: PAL/NTSC HDMI Output: 480i/576i, 480p/576p, 720p, 1080i, 1080p, 1080/24p. Audio • Digital output (Coaxial): 0.5 Vp-p (75 Ω) • HDMI output USB • USB terminal: 5V 500mA • USB 1.1/USB 2.0 Full-speed/USB 2.0 High-speed • Supporting range: USB Mass Storage Class Device, Card reader, Flash disk.
8 Troubleshooting If you experience any of the following difficulties while using this unit, check the list below before consulting your nearest TOSHIBA dealer. English Problem Tip No reaction to the remote control. Connect the product to the power outlet. Point the remote control at the product. Insert the battery correctly. Insert new battery in the remote control. Turn on the TV. No video signal on the display device. Set the TV to the correct external input. Select the correct video resolution.
Cannot find a JPEG file. Make sure that the selected group (folder) does not contain more than 9,999 files for DVD and 999 files for CD. Make sure that the selected folder does not contain more than 9,999 files for DVD and 999 files for CD. Make sure that the file extension is .mp3 or .MP3. Cannot upgrade SW. When you upgrade the system with USB flash drive, you should make a new folder named UPG_ALL, and copy the upgrade file into this folder. Sometimes the options of setup menu cannot be selected.
9 Glossary English Aspect ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a high definition or wide TV is 16:9. The letterbox allows you to enjoy a picture with a wider perspective on a standard 4:3 screen. Dolby® Digital Plus Dolby Digital Plus is the next generation digital audio compression technology developed as an extension to Dolby Digital. Blu-ray DiscTM supports 7.1 multi-channel surround sound output.
English can hold an unlimited number of video, audio, picture or subtitle tracks inside a single file. It is intended to serve as a universal format for storing common multimedia content, like movies or TV shows. MP3 file format with a sound data compression system. MP3 is the abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio Layer 3. With the MP3 format, one CD-R or CD-RW can contain about 10 times more data than a regular CD.
10 License Information on the Software Used in This Product This document is statement purpose only. Not concerned with operation of this product. English The software pre-installed in this product consists of multiple, independent software components. Each software component is copyrighted by a third party. This product uses software components that are distributed as freeware under a third-party end-user license agreement or copyright notice (hereinafter referred to as a “EULA”).
GPLv2 iproute2 GPLv2 mcr-tcpdump BSD dibbler GPLv2 sysvinit GPLv2 module-init-tools GPLv2 util-linux-ng GPLv2 procps (ps, top) LGPLv2 psmisc GPLv2 coreutils GPLv2 gawk GPLv2 grep GPLv2 findutils GPLv2 bash GPLv2 tar GPLv2 sed GPLv2 gzip GPLv2 inetutils GPLv2 ncurses ncurses.txt gdb (gdbserver) GPLv2 Das U-Boot GPLv2 International Components for Unicode ICULicense.txt zlib zlib.txt FreeType FreeType.txt Expat expat.txt libcurl libcurl.txt libjpeg libjpeg-7.
English mtd-utils GPLv2 libmtp LGPLv2.1 libusb LGPLv2.1 libusb-compat LGPLv2.1 Unicode Bidirectional Algorithm Unicode_Bidirectional_Algorithm.txt HarfBuzz HarfBuzz.txt ntfsprogs GPLv2 xz cpio libelf GPLv2 ntp GNU GPLv2 GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License.
source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, English c) Accompany it with the information you received as to the offer to distribute corresponding source code.
Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and “any later version”, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10.
sake, the GPL requires that modified versions be marked as changed, so that their problems will not be attributed erroneously to authors of previous versions. English Some devices are designed to deny users access to install or run modified versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users’ freedom to change the software.
The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source. The Corresponding Source for a work in source code form is that same work. 2. Basic Permissions. All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program.
Corresponding Source under the terms of this License, in one of these ways: English a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange.
When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or from any part of it. (Additional permissions may be written to require their own removal in certain cases when you modify the work.) You may place additional permissions on material, added by you to a covered work, for which you have or can give appropriate copyright permission.
that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License. English An “entity transaction” is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations.
13. Use with the GNU Affero General Public License. Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work, and to convey the resulting work.
be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. English You should have received a copy of the GNU General Public License along with this program. If not, see . Also add information on how to contact you by electronic and paper mail.
of your choice, consistent with the licensing of the Independent Modules.
2. No Weakening of GCC Copyleft. <!--Web.Config Configuration File--> <configuration> <system.web> <customErrors mode="Off"/> Runtime Error </system.web> |
