Printer User Manual
Table Of Contents
- Safety Summary
- 1. PRODUCT OVERVIEW
- 2. PRINTER SETUP
- 2.1 Precautions
- 2.2 Procedure before Operation
- 2.3 Turning the Printer ON/OFF
- 2.4 Connecting the cables to the Printer
- 2.5 Connecting the Power Adapter and the Power Co
- 2.6 Opening/Closing the Top Cover
- 2.7 Loading the Media
- 2.8 Loading the Ribbon
- 2.9 Media Sensor Calibration, Self Print Test, and Dump Mode Utilities
- 2.10 How to Use an SD Card
- 3. MAINTENANCE
- 4. TROUBLESHOOTING
- APPENDIX 1 SPECIFICATIONS
- APPENDIX 2 INTERFACE
- GLOSSARIES
2. PRINTER SETUP ENGLISH VERSION EO1-33087
2.5 Connecting the Power Adapter and the Power Cord
E2- 5
2.5 Connecting the
Power Adapter and
the Power Cord
1. Make sure that the printer power switch is in the OFF (O) position.
2. Insert the Power Cord into the inlet of the Power Adapter.
3. Insert the Power Adapter connector into the Power Jack on the rear of
the printer.
Power Adapter
Power Cord
Power Adapte
r
Connecto
r
Power Jack
NOTES:
1. Since the power cord is not
enclosed in this printer, please
purchase a proper one after
referring to page 1-2.
2. The EA10953 AC adapter
should be exclusively used for
the B-EV4T Series printer.
The B-EV4T Series printer
must be powered by the
EA10953 AC adapter.