User manual

November 2003 © TOSHIBA TEC 13 - 9 e-STUDIO3511/4511 REVOLVER UNIT
13
(3) Remove 1 screw and take off the color toner
cartridge sensor.
[E] Color auto-toner sensor / Color auto-toner
sensor shutter solenoid
(1) Take off the receiving tray ( Chapter 2.5.1
[B]).
(2) Disconnect 1 connector and remove 3 screws.
Then take off the color auto-toner sensor unit.
(3) Remove 2 screws, disconnect 1 connector and
take off the color auto-toner sensor shutter
solenoid.
Fig. 13-706
Fig. 13-707
Fig. 13-708
Connector
Color auto-toner
sensor unit
Color auto-toner sensor
shutter solenoid
Connector
(4) Remove 2 screws and 1 spring and take off
the stay.
Fig. 13-709
Stay
Spring