Flat Panel Television User's Manual

ENGLISH
16
ASSEMBLING AND PREPARING
Tidying cables
1
Install the power cord holder and power cord. It will
help prevent the power cable from being removed
by accident.
(For 42PN4500)
Power cord holder
(For 50PN4500, 50/60PN5300, 50/60PN6500, 60PN6550)
Power cord holder
2
Gather and bind the cables with the cable holder.
Cable holder
CAUTION

Do not move the TV by holding the cable holder
and power cord holder, as the cable holders may
break, and injuries and damage to the TV may
occur.
CAUTION

Disconnect the power before moving or installing
the TV. Otherwise electric shock may occur.

If you install the TV on a ceiling or slanted wall,
it may fall and result in severe injury. Use an
authorized LG wall mount and contact the local
dealer or qualified personnel.

Do not over tighten the screws as this may cause
damage to the TV and void your warranty.

Use only screws and wall mounts that meet
the VESA standard. Any damages or injuries by
misuse or using an improper accessory are not
covered by the warranty.
NOTE

Use only screws that are listed on the VESA
standard screw specifications.

The wall mount kit includes an installation manual
and necessary parts.

The wall mount bracket is optional. You can obtain
additional accessories from your local dealer.

The length of screws may differ depending on the
wall mount. Make sure to use the proper length.

For more information, refer to the manual supplied
with the wall mount.