Operation Manual

42
English
CONTROLS AND FEATURES
When the Auto Brightness Sensor is activated, it will
automatically optimise the backlighting levels to suit
ambient light conditions.
a In the Advanced Picture Settings menu, press
B / b to select Auto Brightness Sensor and
press OK.
b Press B / b to select On or Off and press OK.
When the Active Backlight Control feature is activated,
it will control the backlighting levels depending on various
scenes such as picture motion, bright scene or dark
scene.
a In the Advanced Picture Settings menu, press
B / b to select Active Backlight Control and
press OK.
b Press B / b to select High, Low or Off and press
OK.
High: To control the backlighting levels depending
on various scenes such as picture motion,
bright scene or dark scene
Low: To control the backlighting levels for dark
scene
Black/White Level increases the strength of dark areas of
the picture to improve the definition.
a In the Advanced Picture Settings menu, press
B / b to select Black/White Level and press OK.
b Press B / b to select High, Middle, Low or Off
and press OK.
When watching a DVD, the compression may cause some
words or picture elements to become distorted or
pixelated.
Using the MPEG NR feature reduces this effect by
smoothing out the edges.
a In the Advanced Picture Settings menu, press
B / b to select Noise Reduction and press OK.
b Press b to select MPEG NR and press OK.
c Press B / b to select Off, Low, Middle or High to
suit your preference and press OK.
NOTE: If the picture mode is set to Game or PC, this
feature is not available.
DNR allows you to “soften” the screen representation of a
weak signal to reduce the noise effect.
a Select DNR from the Noise Reduction menu.
b Press B / b to select Off, Low, Middle, High or
Auto and press OK. The differences may not
always be noticeable (for the best result use lower
settings as picture quality can be lost if the setting
is too high).
NOTE: If the picture mode is set to Game or PC, this
feature is not available.
The Resolution+ feature allows you to adjust the clarity
levels for your desired picture settings.
a In the Advanced Picture Settings menu, press
B / b to select Resolution+ and press OK.
b Press B / b to select On.
NOTE:
• This feature may not work properly depending on the
content.
• Noise may appear in the picture depending on the
device connected to the TV (e.g. a device with a specific
enhancer function).
Auto Brightness Sensor
Active Backlight Control
Black/White Level
MPEG NR – Noise Reduction
DNR – Digital Noise Reduction
Resolution +
< Noise Reduction
MPEG NR Low
DNR Auto