TOSHIBA OWNER'SMANUAL ProjectionTelevision COLOR_TRERH" _ TouchFecus TM
Dear Customer, Thank you for purchasing this Toshiba TV.This manual will help you use the many exciting features of your new TV. Before operating the TV, please read this manual completely, and keep it nearby for future reference. Safety Precautions TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. in the triangle PRODUCT ToshibaCares! to YOURSELF.
Important Safety Instructions 1) Read these instructions, r Installation _^ 2) Keep these instructions. Follow these recommendations and precautions and heed all warnings when installing your TV: 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus water. Installation,Care, and Service 16) Never modify this equipment.
30) [This item applies to projection TVs only) If the air temperature rises suddenly (for example, when the TV is first delivered), condensation may form on the lenses. This can make the picture appear distorted or the color appear faded. If this happens, turn off the TV for 6 to 7 hours to allow the condensation to evaporate. 24) Always operate this equipment from a 120 VAC, 60 Hz power source only.
Important Safety Precautions for Split Cabinet Feature (Models 57H83 and 65H83 Toshiba TV models 57H83 and 65H83 have a split cabinet feature that allows disassembly of the cabinet into two sections during installation. For details, please refer to the insert titled "Disassembly/ Reassembly Instructions for Split Cabinet Feature" that accompanied this owner's manual in the accessory pack. If you do not have the insert, you can download a copy of it from our Web site (,www.toshiba.com/tacp in the U.S.A.
Important Safety Information ............................. 2-5 Introduction ................................................................ Welcome to _lbshiba ......................................................... Exploring your new TV ................................................... Using the POP double-window 7 Switching 7 Freezing the POP picture Adjusting 7 regarding Quick Connecting Connect Guide ........................ your 11/ ...............................................
Introduction Welcome to Toshiba Congratulations! You have purchased one of the finest projection TVs on the market. The goal of this manual is to guide you through setting up and operating your Toshiba TV as quickly as possible. Note regarding iiiii QuickConnectGuide This manual applies to models 46H83, 51H83, 57H83, and 65H83. Before you start reading, check the model and serial numbers on the back of your TV.
Connecting your TV Note: Cables are not supplied with your T_ • Coaxial cable is the cable that comes in from your antenna, cable TV service, or cable converter box. Co_'dal cable uses "F" connectors. Coaxial (antenna) cable • Standard A/V (audio/video) cables usually come in sets of three, and are typically color=coded according to use: yellow tbr video, red for stereo right audio, and white for stereo left (or mono) audio.
J premium channels, select ANT-2, tune the TV to channel 3 or 4 (whichever channel to change channels. You will need: is vacant in your area), and use the converter box the remote control w/#not operate some features,such asprogramming your favorite channels,labeling channels,and locking channels • three coaxial cables From Cable Connecting TV a cable converter box and VCR Note.
Connecting and a VCR a DVD player or satellite receiver This connection allows you to watch DVD/satellite, VCR, and TV programs, and record one TV channel while watching another channel. You will need: • two coaxial cables (three if satellite receiver is used) • one set of standard A/V cables • one pair of audio cables • one S-video cable (between the TV and DVD player/satellite receiver) Stereo VCR Note.
and record TV programs. Your TV has ColorStream _ (component video) inputs. Connecting your TV to a DVD player with component video inputs (such as a Toshiba DVD player with ColorStreamC_3 can greatly enhance picture quality and realism. - To record one TV program while watching another TV program, tune the VCR to the channel to record, and tune the TV to the channel to watch.
Connecting a DTV receiver/set-top box with ColorStream "_(component video) and a VCR This connection allows you to watch DTV (digital TV), VCR, and TV programs, and record DTV and TV programs. Your TV has ColorStream (component video) inputs. Connecting your TV to a DTV receiver with component video inputs can greatly enhance picture quality and realism.
one TV channel You will need: while watching another TV channel.
Connecting a device to the DVI/HDCP 1 input The DVI/HDCP input on your TV is designed to accept HDCP program material in digital form from EIA/CEA-861-compliant 2 consumer electronic devices, such as a set-top box or DVD player equipped with a DV1-D digital single-link output connection. 3 The DVI/HDCP input is designed for best performance with 1080i high-definition video signals. The DVI/HDCP input also will accept and display 480p, 720p, and 480i picture signals.
To control the audio, turn on the TV and the stereo amplifier, and turn off the built-in speakers (see "Turning off the built-in speakers" on page 55).
Using the remote control Preparing the remote control for use Your TV remote control can operate your TV and most cable converter boxes, satellite receivers, VCRs, DVD players, and HT1Bs (home theater in a box), even if they are difli'erent brands. If you have a Toshiba device: Your TV remote control is preprogrammed devices. See page 19.
Programming the remote control to operate a cable converter box, satellite receiver, VCR, DVD player, or HTIB (home theater in a box) RECALL Your Toshiba TV remote control is preprogrammed to operate most Toshiba devices. To program your TV remote control to operate a non-Toshiba device (or a Toshiba device that it is not preprogrammed to operate), follow the steps below. For details on using the remote control to operate the device, see page 19. 1.
Remote control Satellite receiver (cont.) P,CA: 008,009,013,016 Realistic:030 Samsung:059 Sony: 014,055 StarChoice: 057 Star"li'ak:025,026, 037, 054 STS: 024 "Ibshiba:000, 001,002, 003, 004, 005, 006, 007, 020, 03t, 056 Uniden: 021,028, 030, 032, 035, 039, 043, 045, 047, 058 Zenith: 027 TV/VCR Combo Action: 078 GE: 059, 062 Goldstar: 065 Panasonic:065 Plvdsion: 078 Quasar: 065 Realistic:079 Sow: 074 "Ibshlba:057 Zenith: 065 DVD/VCR Combo Go Video: DVD-087,VCR-08I JVC: DVD-088,VCR-082 P.
Using the remote control to operate a cable converter box, satellite receiver, VCR, DVD player, or HTIB (home theater in a box) If you have a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate, you must first program the remote control to recognize the device (if you have not already done so). See pages 17 and 18. To use your TV remote control to operate a: • cable converter box or satellite receiver, set the Device Switch to CBL/SAT.
Learning about the remote control The buttons used for operating the TV only are described here. POWERturns the TV on and ofi: RECALLdisplays screen information (page 56) SLEEPsets the TV m turn off'at a specific time (page 50) TV/VIDEOselects video input source (page 48) MUTEmutes the sound (page 52) DeviceSwitchswit&es between TV, CLB/SAT/VCR, and DVD (Pages 17-19) Set to "TV" to control the TV.
Setting up your TV Learning about the menu system After you have installed the batteries and programmed the remote control, you will need to set some preferences on the TV using the menu system. You can access the menu using the buttons on your TV or remote control. 1. Press MENU to display the menu system. 2. Press • or • to select menu. 3. Press • or • select an item. 4. Press • or • to select or adjust a setting.
Changing the on-screen display language You can choose from three different languages (English, French and Spanish) for the on-screen display of adjustment menus and messages. • I_vA TV front panel To select a language: 1. Press MENU, and then press • or • until the SET UP menu appears. 2. Press • or • to highlight LANGUAGE. MENU SET UP ANT1/2 TV/CABLE CH PROGRAM ADD/ERASE OUICK CONNECT ANTI CABLE ADD GUIDE 3. Press • or • to highlight your desired language.
Adding channels to the TV's memory When you press Channel • or •, your TV will stop only on the channels stored in the TV's channel memory. Note." Follow the steps below and on the next page to program all active channels into the TV's memory. /rzthe channel memo_ you must use the Channel Number buttons on the remote Programming channels To tune the TV to a channel nog programmed contrb[ automatically Your TV can automatically detect all active channels in your area and store them in its memory.
3. Press • or • to highlight ADD/ERASE. • •vA TV front panel MENU 4. Press • or • to select ADD or ERASE, depending on the function you want to perform. 5. Repeat steps 1-4 for other channels you want to add or erase. Using the Quick Connect Guide ® ® ® The Quick Connect Guide automatically starts the first time the TV is turned on. ® ®® You can change the current settings any time. 0®® 1. Press MENU, and then press • or • until the SET UP menu appears. 2.
Changing channels To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons (0-9 and 100). For channels 100 and higher, press the 100 button, and then the next two numbers. For example, to select channel 125, press 100, 2,5. .... -- To change to the next programmed channeh Press Channel • or • on the TV or remote control. Changing channels using Channel Number SpeedSurf To use SpeedSurf to change to a specific programmed channel: 1.
Manually adjusting the color convergence 1. Press MENU, and then press • or • until the PICTURE appears. 2. Press • or • to highlight CONVERGENCE menu (below left). 3. Press • or • to display the Center Convergence menu (below right). P_CTURE ANTENNA _ODE FLESH TONE CableC_ear DNR COLOR TEMPERATURE __DISPLAY F -4- SPORTS ON OFF COOL RMAT 108Oi Ill.
Using the TV's features Adjusting the channel settings Switching between two channels using Channel Return The Channel Return f_:ature allows you to switch between two channels without entering an actual channel number each time. TVNIDEO 1. Select the first channel (or video mode) you want to view. 2. Select a second channd using the Channel Number buttons (0-9, 100). @ ® ® 3. Press CH RTN. The previous channel will display.
3. Press • or • to display the FAVORITE CH1 menu, for example. CH INPUT will be highlighted. i Notes: • TheFAV TA buttons operate as MENU < I_ buttons when a menu/s on sereeo • Thefavorite channel faazureis not available /o ANT2 mode _CUSTOM BACKGROUND CLEARTVL_/',B'_ 4. Press the Channel Number buttons to enter one of your favorite channels. 5. Press ENTER. 6. Repeat steps 4 and 5 for other channels. To select your favorite channels: Press FAV • or A.
Labeling channels Channel labels appear above the on-screen channel number display each time you turn on the TV, change a channel, or press RECALL. You can choose any four characters to identify a channel. To create channel labels: 1. Press MENU, and then press • or • until the CUSTOM appears. menu 2. Press • or • to highlight CH LABELING. 3. Press • or • to display the CH LABELING menu. CH INPUT will be highlighted. Q ...... T,M ER ON o4...... :: OOh Om S_ F ii ii 4.
Viewing the wide-screen picture (480i and 480p signals only) formats You can view 480i and 480p format programs in a variety of picture sizes--Natural, Theater Wide 1, Theater Wide 2, Theater Wide 3, and Full. Number The way the image displays in any of the picture sizes will vary depending on the format of the program you are viewing. Select the picture size that displays the current program the way that looks best to you. See "Notice of possible adverse effects on TVpicture tube, " below right.
Theater Wide 1 picture size Note: • The picture is non-uniformly enlarged--the center of the picture remains close to its original proportion, but the left and right edges are stretched wider to fill the screen. • A small part of the picture at the top and bottom is hidden; however, this mode cannot be scrolled.
Scrolling the Theater Wide picture (Theater Wide 2 and 3 only) 1. Press PIC SIZE to select either Theater Wide 2 or Theater Wide 3 mode. 2. Press MENU, and then press • or • until the THEATER appears. 3. Press • or • to highlight PICTURE @....... wow SRS 3D FOCUS T_uBas_ P I CTURE menu SCROLL. :: -- PIG SIZE ON ON OFF MENU S I ZE 4. Press • or • to display the scroll adjustment mode. Note." SCROLL &VTO ADJUSTMENT 0 ADJUST 5. Press • or • to adjust the vertical position of the picture.
Using the AUTO ASPECT feature (480i signals only) When the AUTO ASPECT feature is set to ON and the TV receives a 480i signal, the picture size is automatically selected (as described in the following table). Note: TheAUTO ASPECT feature Jsnot avadab/e when wewing antenna (cable) or DVI input sources Not defined 4:3 Theater Wide 2 16:9 Full (no ID-1 data) @ ® ® User-selected picture size {pgs. 30-31) If"t}_esignal does not include aspoct information, selected on pages 30-31 is displayed.
Using the POP double-window feature The POP (picture-out-picture) feature splits the screen into a double window that allows you to watch two programs at the same time. The POP program can come from a TV broadcast or an external source, such as a VCR.
Switching the main and POP pictures Press SWAP while you are using the POP and POP pictures. Freezing the POP 1. Press FREEZE 2. Press FREEZE EXT picture while the POP The POP window feature to switch the main will appear is not on the screen. with a still picture. again to renew the still picture. _5t'_5 8 __ _,, _;_ _ @ To erase the still POP window: /_ FREEZE m SWAP I Still picture Press EXIT.
POP double-window aspect ratio The POP double-window feature displays each picture according to its input signal aspect ratio, as illustrated below. Note: • TheAUTOASPECTfeagure (page 33) does not operate in POP double window mode • Aspect ratio/s the ratio of width to height of the picture 480i 480i FO_ 13 AV< • ENTER CH SCAN Using the programmed You can use the programmed the channels you programmed 1. Press CH SCAN.
Using the favorite channel search function You can use the law)rite channel search function to quicldy scan your favorite channels (see "Programming your favorite channels" on page 27). 1. Press FAVORITE. Note: The favoritecharme/search funeOondoes hog operate in DVI mode The TV automatically enters POP mode, and begins a sevenpicture scan of your favorite channels in the POP window. @ @® @® ® I_ _-, 9 i_iii_,'r2¢ @o®k @®® 2.
Using the LOCKS menu The LOCKS menu includes the V-Chip, CH Lock, Video Lock, and New PIN Code functions. You can use these functions after entering the correct PIN code. Entering Note: The ¼Chip function Jsavaffab/eon/y for the US ¼Chip system TheCana&an ¼Chip system/s not supported_ the PIN code 1. Press MENU, and then press • or • until the LOCKS menu appears. RECALL _LOCKS V CHIP ENABLE BLOCKING TV RATING MpAARAT]NG BLOCKING OPTION CH LOCK VIDEO LOCK GAME T_MER FRONT PANEL LOCK N_PIN CODE 2.
Using the V-CHIP menu Some TV programs and movies include signals that classify the content of the program (violence, sex, dialog, language). The V-CHlP conrol feature in this TV detects the signals and blocks the programs according to your selections. To use this feature, perform the following setup. Note: The ¼ Chip function is avai/ab/eon/y for the LL_ ¼Chip system TheCuria&an ¼Chip systemis not supported_ ENABLE BLOCKING LOCKS menu 1. From the LOCKS menu, select ENABLE BLOCKING. 2.
MPAA RATING (Independent rating system for movies) 1. From the LOCKS menu, select MPAA RATING. 2. Press • or • to display the MPAA RATING or • to highlight MPAA RATING. LOCKS menu menu, then press • _LOCKS v CHIP ENABLE BLOCKING CH LOCK LOCKS i BLOCKING ON ii OFF ii OPTION ............ FRONT PANEL LOC_ NEW pIN CODE To select each item: Press • or •. 3. Press • to lock ("X") or press • to unlock ("¢'").
Unlocking programs temporarily 1. If you try to watch a TV program that exceeds the rating limits you set, the TV enters program lock mode. After 4 seconds, the TV starts the auto favorite channel search function (see page 37). You can either unlock the program temporarily (see steps 2-4) or select a non-locked program to watch. After 4 seconds rials _ROGRAM rv_G E×OEED8 • I_AS_£EN 6LOOKEt_! V GET • I M I r_ E×C_'>S SE r k _M I rs _US_I Mur_ CA_E VO E_yEF_ mr_ 9 C,_LE g 2.
Tounlockindividual channels: 1. FromtheLOCKSmenu,select CHLOCK. 2. Press • or• todisplay theCH LOCK menu. 3. Press A•• • to highlight the channel you want to unlock, then press ENTER. _ LOCKS _LOCKS V_HI P ENABLEBLOCK TV RATING MpAA RATING ING ON I_ V_H_P ENABLEBLOCK iV RATING MPAA RATING V_DEO GAME T_MER FRONT PANEL LOC_( N_ P IN CODE 33 0 TV 0 _ 0 0 _ CABt EI_ FRONT _NG ON LOCK 12 PANEL NEW piN _8 33 ii LC*OK CODE TV ¢:A_I { 4. Repeat step 3 for other channels.
Using the game timer You can use the GAME TIMER feature to automatically activate the VIDE() LOCK feature, to set a time limit tor playing a video game (the VIDE(') LOCK is set to VIDE()). To set tile game timer: Note: Towatch a VIDEO soume alz_rff_egame diner has activated the vdeo lock,you will need to set the VIDEO LOCK feature to OFF tin the LOCKS menu). 1. From the LOCKS menu, select GAME TIMER. 2.
Adjusting Selecting the picture the picture mode Note: You can select your desired picture type from four picture modes: Sports, Standard, Movie, and Preference.
Saving your new preferences You can save the PICTURE qualities (contrast, brighmess, color, tint, and sharpness) you adjusted in the picture preference mode. To save your new preferences: ®®® 1. Press MENU, and _hen press • or • until the PICTURE menu appears. i@!O ® 2. Press • or • to highlight SAVE NEW PREFERENCE. 0 ® !® i 3. Press • or •. When complete, the menu displays "DONE". mcruRE A.TE_.
Using the flesh tone feature This feature displays natural flesh tones by correcting the tint. To turn on the flesh tone feature: 1. Press MENU, and then press • or • until the PICTURE appears. 2. Press • or • to highlight FLESH TONE. menu 3. Press • or • to highlight ON. @@@@@@ i _ooE P_EFERE,OE COLOR TEMPERATURE DISPLAY FORMAT CONVERGENCE SAVE NEW i MEDIUM 10_OL PREFERENCE Using the CableClear TM DNR feature This feature allows you to reduce visible interference in your TV picture.
Selecting the display format (for 480p signals only) Note: Use this feature to convert a 480p input signal to 540p or 1080i. To select the display format: 1. Press MENU, and then press • or • until the PICTURE appears. /fyou nodeefhekerin a 480p image, _ry setting the DISPLAY FORMATfeature zo 540p menu 2. Press • or • to highlight DISPLAY FORMAT. 3. Press • or • to select 540p or 1080i as you desire.
Selecting the video input source Press TV/V1DEO on the remote control or TV to view a signal from another device connected to your TV, such as a VCR or video disc player (see illustrations below). You can sdect ANT 1, VIDEO 1, VIDEO 2, VIDEO 3, C*)lorStream HD1, ColorStream HD2, DV1, orANT 2 depending on which input jaclls are used for connecting the devices (see "Connecting your TV" on page 8).
Using the closed caption feature The closed caption feature has two options: • Captions An omscreen display of the dialogue, narration, and sound effects of TV programs and videos that are closed captioned (usually marked as "CC" in TV /isti_igs). • Text An on-screen display of information not related to the current program, such as weather or stock data (when provided by individual stations). To view captions or text: 1. Tune theTV to the desired program. 2.
Setting the ON timer To set the ON timer to turn on the TV automatically: 1. Press MENU, and then press • or _" until the CUSTOM appears. menu POWER 2. Press • or • to highlight ON. 3. After the number position starts to blink, press the Number buttons (0-9) to enter the length of time until the TV turns on automatically. You can set the ON timer in 10-minute increments, up to 12h00m. Number 4. Press ENTER to start the timer.
Setting the clock To set the clock: 1. Press MENU, and then press • or • urltil the SET UP menu appears. 2. Press • or • to highlight CLOCK SE_ Note : If the TV'spower source is Joterrupted[ff?e powel cold is"u_,,plu2gedof a power f_/luf_ occurs), the dock must be resez 3. After the number position starts to blink, press the Number buttons (0-9) to enter the correct time. The clock operates on a 24-hour cyde. 4. Press ENTER to start the clock.
Adjusting the sound Muting sound the Press MUTE to temporarily reduce (1/2 MUTE) or turn off (MUTE) the sound. While the sound is off, the screen will display "1/2 MUTE" or "MUTE" in the lower right corner. Every time you press the button, the mute mode will change in the following order. [_ Normal _ 1/2 MUTE _ MUTE RECALL @ ® ® ® ® ® • ® ® ® When you select "MUTE" mode, the closed caption feature is automatically activated. To deactivate this feature, deactivate MUTE.
Using the WOW TM surround sound feature WOW is the latest audio enhancement technology combined with SRS 3D and TruBass of SRS Labs individual technologies. The feature uses stereo signals front a TV broadcast or video input. To adjust the WOW feature: 1. Select STEREO page 52). 2. Press MENU, appears. Note: If the broadcast Jsmonaural, the SRS 3D effect doesnot work mode (See "Selecting and then press • or • stereo/SAP broadcasts" until the THEATER 3.
Resetting your audio adjustments The RESET function returns the audio adjustments to the following factory settings: Bass .................. center (50) Treble ............... center (50) Balance ............ center (0) To reset the audio adjustments: 1. Press MENU, and then press • or • until the AUDIO menu appears. 2. Press • or • to highlight RESET. 3. Press • or •. The menu displays "DONE". AUDIO MTS STEREO ....
Turning off the built-in speakers Use this feature to turn the TV speakers offwhen you connect an audio system (See "Connecting an audio system" on page 15). To turn offthe built-in 1. Press MENU, 2. Press • speakers: the_ press • or • m_til AUDIO or • to highlight SPEAKERS. 3. Press • or • to highlight OFE menu Note: Make sure the volume centre/of your audio amplifier is set to a moderate listening levd appcars.
Using the StableSound _ feature When the signal source is changed, the StableSound feature limits the highest volume level to prevent extreme changes in volume (for example, to prevent the sudden increase in volume that often happens when a TV program switches to a commercial). To turn on the StableSound feature: 1. Press MENU, and then press • or • until the AUDIO menu appears. 2. Press • or • to highlight STABLE SOUND. 3. Press • or • to select ON. _AUDIO SBS SBS LEVEL SPEAKERS ON 8O ON .............
Viewing the demo mode The demo mode automatically demonstrates several of your TV's features. This function is provided for demonstration purposes only. To start the demo: Press and hold MENU on the TV front panel for 4 seconds. To stop the demo: Press RECALL, EXIT, or POWER. Understanding the auto power off feature The TV will automatically turn itself off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes its broadcast for tile day.
Appendix Specifications Television System NTSC standard Dimensions 46H83: Width 43-318 40 inches 51H83: Height Depth Width 50 inches (1283 ram) 22 inches (572 mm) 57H83: Height Depth Width 23-718 65H83: Height Depth Width Channel Coverage VHF: 2 through 13 UHF: 14 through 69 Cable TV: Mid band (A-8 through A-l, A through i) Super band 0 through W) Hyper band (AA through ZZ, AAA, BBB) Ultra band (65 through 94, 100 through 125) Power Source Height Depth 120 V AC, 60 Hz Power Consumption 4
Troubleshooting Before calling a service technician, please check the following table for a possible cause of the problem and some solutions. Problem Solution TV will not turn on • Make sure the power cord is plugged in, then press POWER. • The remote control batteries may be dead. Replace the batteries. No picture, no sound • Check the antenna/cable No sound, picture OK • • • • Poor picture, sound OK • Check the antenna connections. The sound The station Check that Check that properly.
Limited United States Warranty for 27" FST PURE _ and All Larger Television Models Toshiba America Consumer Products, Inc ("TACP"} and Toshiba Hawaii, Inc ("THI"} make the following limited warranties to original consumers in the United States THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. PRODUCTS PURCHASED IN THE U.S.A.
Limited Canada Warranty for 27 n FST PURE _ and All Larger Television Toshiba of Canada Limited ("TCE'] makes the following limited warranties to original consumers in Canada THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. PRODUCTS PURCHASED IN THE U.S.A. AND USED IN CANADA ARE NOT COVERED BY THESE WARRANTIES. PRODUCTS PURCHASED IN CANADA AND USED IN THE U.S.A.
Index A OP ON-timer ................................................................................. 50 A/V cables (standard) ......................................................... 8 A/V receiver connection ................................................... 15 Picture adjustments COLOR TEMPERATURE .............................................. 46 Ambient light sensor (ALS) ............................................. 45 FLESH TONE ....................................................................
TOSHIBA AMERICA CONSUMER HEAD OFFICE: 82 TOTOWA ROAD, WAYNE, NJ 07470, U.S.A. NATIONAL SERVICE DIVISlON:142O-B TOSHIBA DRIVE, LEBANON, TOSHIBA HAWAII, HEAD OFFICE: 327 KAMAKEE STREET, HONOLULU, TOSHIBA OF HEAD OFFICE: 191 McNABB SERVICE CENTERS: STREET, MARKHAM, TORONTO: MONTREAL: VANCOUVER: PRODUCTS, TN 37087, U.S.A. INC. HI 96814, U.S.A.-TEL: CANADA (808) 591-9281 LTD.
