Flat Panel Television User Manual

104
Basic features
Setting the timer to turn on the TV
Setting the timer to turn on the TV
You can set the on timer to turn on the TV to a preset channel or
input at a preset time.
To activate the timer:
1 Press the MENU button. Select TIMERS, On Timer, and
then press the OK button.
2 Press the ( / arrow) buttons to select Enable On Timer.
3 Press the ( / arrow) buttons to select On.
If the Enable On Timer is set to Off, other menus under On Timer
cannot be changed.
It can take the TV approximately 60 seconds to turn on through the
ON TIMER feature.
To set the timer:
1 Press the MENU button. Select TIMERS, On Timer, and
then press the OK button.
2 Set these options to your preference:
3 Select Done, and then press the OK button.
If you do not operate the TV for 1 hour after it is powered on by the
On Timer feature, it turns off.
To cancel the timer:
1 Press the MENU button. Select TIMERS, On Timer, and
then press the OK button.
Item: Description:
Input Video input source
Channel Channel to view
Volume Volume level
Time until Power On Desired length of time until the TV turns on:
minimum=00:10, maximum=12:00
Press the ( / arrow) buttons
Use the number buttons
NOTE
NOTE