Flat Panel Television User Manual

40) During normal use, the TV may make occasional
snapping or popping sounds. This is normal,
especially when the unit is being turned on or off.
If these sounds becomefrequent or continuous,
unplug the power cord and contact a Toshiba
Authorized Service Center.
41) DANGER:RISK OFSERIOUS
PERSONALINJURYOR DEATH!
Q.
Never strike the screen
with a sharp or heavy
object.
ultravioletradiationfrom the sun.Whenselecting
a locationfor the television,avoid locationswhere
the screen maybe exposedto direct sunlight,
such as in front of a window.
• Nevertouch, press, or placeanythingon the LCD
screen.Theseactionswill damagetheLCD screen.
If you needto cleanthe LCDscreen,followthe
instructions in item 35 on page4.
Service
43)
WARNING:
RISK OF ELECTRICSHOCK!
Neverattempt to servicethe TVyourself. Opening
and removing the covers mayexposeyouto
dangerousvoltageor otherhazards.Failureto follow
this WARNINGmayresult in deathor serious injury.
Referall servicing not specifiedin this manualto a
ToshibaAuthorized ServiceCenter.
44) Ifyou havethe TV serviced:
• Askthe servicetechnicianto useonly replacement
parts specifiedbythe manufacturer.
• Uponcompletionofservice,askthe servicetechnician
to performroutinesafetychecksto determinethatthe
TVis in safeoperatingcondition.
45) Thecold cathodefluorescentlampin the LCDpanel
containsa smallamount of mercury.
Whenthe TV reachesthe end of its useful life,
disposeof the usedTVbythe approvedmethod for
your area,or ask aqualified servicetechnicianto
properlydisposeof the TV.
Note: The lamp(s) inside this
product contain mercury. Disposal
may be regulated due to
environmental considerations. For disposal
or recycling information, contact your local
authorities or the Electronics Industries
Alliance (ww_ eiae. org).
Choosinga location for your LCDTV
ToDisplay yourLCDTV on the included
PedestalStand:
Observe the following safety precautions:
1) Readand Followthe pedestalassemblyinstructions
includedwith the pedestal.
CAUTION:Beforebeginning pedestalassembly,
carefullylay the front of the LCDPanelfacedown on
a flat, cushionedsurface such as aquilt or blanket.
Leavethe bottom of the unit protruding over the edge
of the surfaceand assemblethe pedestalas indicated
below.
Note: Extreme care should always be used
when attaching the pedestal stand to avoid
damage to the LCD panel.
2) Placethe TV on a sturdy, levelsurfacethat can
supportthe weightof the TV.
3) Besure to securethe TVto a wall, pillar,surface, or
otherimmovable structure.(_ item 25, page4).
ToDisplayyourLCDTV using a Wall
Bracket:
If you decide to wall mount your LCD TV,always use
a UL listed wall bracketappropriate for the size and
weight of the LCD TV([:_ page 2):
1) CAUTION:Two peopleare required for installation.
2) Unplug and removeany cables and/or other
component connectors from the rear of the TV.
3) Removethe screws of the VESAMounting Pattern
show in the next page.
CAUTION:Do not use the screws removed from
the back cover to attach the wall mount bracket to
the TV.
4) Always use the screws supplied or recommended
by the wall mount manufacturer.
5) Follow the instructions provided with your wall
bracket. Before proceeding, makesure the
appropriate bracket(s) areattached to the wall and
the back of the TV as described in the instructions
provided with the wall bracket.
6) After attaching the appropriate bracket(s) to the
wall and the back of the TV, remove the pedestal
stand from the TV as described below.
7) VESAMounting Pattern
55" 400x200 mm M8
(unit in ram)