Flat Panel Television User's Manual

Basic features

Using your computer with the TV

Adjusting the image

If the edges of the picture are hidden, readjust Horizontal Position and

Vertical Position. If the picture is affected by interference, readjust Clock

Phase and Sampling Clock.

1 Select PC input mode, see “Selecting the video input to view” on

page 71.

2 Press the SETUP button.

3 Select Picture > Display Settings and press the OK button.

4 Press the

(arrow) buttons to select PC Settings, and then

press the OK button.

NOTE

If a computer is not connected or there is no PC input signal, this menu will

not be available.

5 Press the

(arrow) buttons to select an item and press the OK

button.

6 Press the

(arrow) buttons to make adjustments.

NOTE

The screen is disrupted momentarily when adjusting the PC settings.This is

not a sign of malfunction.

Mode: Description: Adjustment Range

Horizontal Position Moves the picture left/right Within ±10 from center*

Vertical Position Moves the picture up/down Within ±10 from center*

Clock Phase Helps to reduce noise and sharpen

the picture

Within ±32 from center*

Sampling Clocks Helps to reduce noise and minimize

periodic vertical stripes on the screen

Within ±5 from center*

* The default settings and/or adjustment ranges vary depending on the input signal

format.

To reset the PC Settings:

Select Reset, and then press the OK button.

Using your computer with the TV