Operation Manual

79
English
CONTROLS AND FEATURES
When connecting a surround sound amplifier to the digital
audio output (Sony/Philips Digital Interface Format [S/
PDIF]), the following options can be selected or adjusted.
a In the Sound menu, press B / b to select Digital
Audio Output and press OK.
b Press B / b to select an option.
Audio Format
Press
C / c to select PCM or Auto.
PCM: This mode outputs PCM format to the digital
audio output socket.
Auto: This mode outputs Dolby Digital (if
available) or PCM to the digital audio output
socket.
Dolby Digital
S Dolby Digital
Dolby Digital Plus
S Dolby Digital
MPEG
S PCM
HE-AAC
S Dolby Digital
Audio Delay
Press
C / c to select Auto or Manual.
Auto: This mode automatically adjusts the audio
timing to meet the video timing.
NOTE: The time lag might be large
between the image and sound depending
on the connected equipment (amplifier
etc.). In that case, select Manual.
Manual:You can manually adjust the audio signal
timing to meet the video signal timing.
Delay Adjustment
Press
C / c to adjust the audio signal timing
(0 – 250 ms) to meet the video signal timing.
NOTE:
This feature is greyed out when Audio Delay is
in Auto.
A time lag will occur when the video signal or
audio signal is changed. Adjust the timing
accordingly.
When adjusting the timing, turn down the volume
of the AV equipment used as far as possible.
Depending on the equipment, noise etc. may
occur when the signal is changed.
Depending on the connected equipment
(amplifier, etc.), adjustment may not be possible.
When the optical digital output setting
(Auto
tPCM) is changed, it may be necessary
to adjust the timing again.
Do not use other than for audio output from the
AV amplifier, etc. (Malfunction may occur)
Digital Audio Output
< Sound
Balance 0
Bass 0
Treble 0
Advanced Sound Settings
Stable Sound
Dynamic Range Control On
Dual Dual 1
Audio Level Offset
TV Speakers On
Headphone Level
Audio Description
Digital Audio Output