Operation Manual

19
English
SETTING UP YOUR TV
Once you have selected a satellite, you can
change further settings under Dish and LNB.
Press OK and
C / c to select Dish or LNB and
press OK.
Under Dish you choose the dish type that will be
used (fixed or moveable dish). The majority of
households have a fixed satellite dish.
LNB allows you to determine the lower and higher
Local Oscillator Frequency (LOF). Usually, the
factory settings do not need to be changed. You
can find the parameters of the lower and higher
LOF on the specification sheet of your LNB.
Press
B / b to highlight Done and press OK.
w If your satellite dish is moveable, the following
Positioning screen will appear.
Press
B / b to highlight Positioning, and then
press
C / c to find the dish position with the
strongest signal level.
Press
B / b to highlight Store Position and press
OK to store the dish position. Repeat steps 22 and
23 for the next satellite as necessary.
If your satellite dish is not moveable, the
Positioning screen will not appear.
Adjust the dish position manually for the maximum
Signal Level strength. The signal level strength is
displayed from 0 % to 100 %. A high signal level
can be achieved by adjusting the satellite dish the
best way possible.
Press
B / b to highlight Done and press OK.
If you select Single Cable in step 22, the Single
Cable Settings screen will appear. You can set
the appropriate value for each item and highlight
Done.
1 Astra 19.2E 1 1
2
3
4
Satellite Settings
Switch Type
LNB Power
None
On
No. Satellite
Dish
LNB
Done
Transponder : 1/120 (10729) MHz
Dish Type : Fixed
Lower LOF : 9750
Upper LOF : 10600
1 Astra 19.2E 1 1
2
3
4
Satellite Settings
Switch Type
LNB Power
None
On
No. Satellite
Dish
LNB
Done
Transponder : 1/120 (10729) MHz
Dish Type : Fixed
Lower LOF : 9750
Upper LOF : 10600
Transponder
Go to 0
Go to Stored Position
Step Size
Positioning
Positioning
Satellite : Astra 19.2E
Signal Level
30%
Store Position
1/120 (10729 MHz V (R))
1
WE
Signal Level
30%
User Slot Number 0
User Slot Frequency 1284
Password PIN None
Single Cable Settings
Done
Verify Slot Frequency