Operation Manual
13
English
SETTING UP YOUR TV
Startup Application
Before switching on the television, put your decoder
and media recorder, if applicable, to
Standby
.
To set up the television use the buttons on the
remote control as detailed on page 6.
a
Press the
1
button. The
Quick Setup
screen will
appear. This screen will appear the first time that the
television is switched on and each time
Reset TV
is
selected.
b
Highlight
Menu Language
and press
C
or
c
to select
the menu language.
c
Press
b
to highlight
Country
and
C
or
c
to select. The
television is now set up to tune the stations for the
selected country.
d
Press
Q
, the
Location
screen will appear.
e
Press
C
or
c
to select
Store
or
Home
. For normal
home use, select
Home
(skip step 6).
If the Home option is selected the AutoView option will
be activated, allowing the TV to automatically adjust
the picture setting based on the user’s individual
viewing environment. In most cases this will result in
the TV operating with lower energy consumption.
f
Press
Q
. If
Store
is selected in step 5, the
Auto
Demo
screen will appear. Press
C
or
c
to select
On
to use the demo.
g
Press
Q
. If the
Ant/Cable In
screen appears, press
C
or
c
to select
Antenna
or
Cable
.
h
Press
Q
, the
Auto Tuning
start up screen will appear
with the option to select between
DTV and ATV
,
DTV
or
ATV
if available. Use
C
or
c
to select the
appropriate mode.
i
Press
b
or
B
to highlight
Start Scan
, then press
Q
.
NOTE:
If
Cable
is selected in step 7, additional setting
options appear in the
Auto Tuning
screen. See “Ant/
Cable In“ section.
The television will start to search for available
DTV
and/or
ATV
channels. The progress bar will indicate
the scan status.
You must allow the television to complete the
search.
When the search is complete the television will
automatically select position one.
The
Auto Tuning
screen will display the total number
of services found.
j
Press
C
or
c
to view the
DTV
(digital channel) or
ATV
(analogue channel) lists.
k
Use
b
or
B
to move through the list to select a
channel then press
Q
to view.
In
ATV
mode some areas may receive duplicate
stations. There may not be a clear picture or the signal
may be weak, so the station order can be changed
using
ATV Manual Tuning
.
REMEMBER:
Press
ATV/DTV
at any time to select
between
ATV
and
DTV
(DTV TV/DTV RADIO/DTV TEXT
if available) modes.
NOTE:
The time will be set automatically by
transmission but can be advanced or decreased by
using
Local Time Setting
in the
DTV Settings
screen.
Quick Setup
Quick Setup
Country Germany
Primary Subtitle Language
English
English
English
English
Secondary Subtitle Language
Primary Audio Language
Secondary Audio Language
Menu Language English
Location
Store
To use the TV for displaying in a store showroom, please
select [Store]. [Home] mode is recommended for normal
use.
Ant/Cable In
Antenna
PLEASE NOTE
The
Reset TV
menu can also be accessed at any
time from the
SETUP
menu.
Auto Tuning
DTV and ATVTuning Mode
Start Scan
Auto Tuning
Progress Found
ATV Tune Waiting...
Channel: C7
DTV Tune 3% 2