Flat Panel Television User Manual

Basic features

Using HDMI

CEC Control

❖ A message appears when 10 minutes, 3 minutes, and 1 minute

are remaining.

❖ If the TV loses power with time remaining, the TV will enter Input

Lock mode when power is restored (as if the GameTimer had

been activated). You must deactivate the Input Lock, see

“Locking video inputs” on page 96.

Locking the control panel

You can lock the control panel to prevent your settings from being

changed accidentally (by children, for example). When Panel Lock

is set to On, none of the controls on the control panel operate

except POWER.

1 Press the MENU button. Select SETTINGS,

PREFERENCES, Parental Control and Locks, and then

press the OK button.

2 Enter your 4-digit PIN code.

3 Press the ( / arrow) buttons to select Panel Lock.

4 Press the ( / arrow) buttons to select On.

When Panel Lock is set to On, “Panel Lock” appears on screen when

the buttons on the TV control panel are pressed. If the POWER button

is pressed, the TV turns off and you must use the remote control to

turn it on.

To unlock the control panel:

❖ Select Off in Step 4 above.

Using HDMI

CEC Control

This feature uses CEC technology and allows you to control

Toshiba HDMI

CEC compatible devices from the TV remote

control via HDMI

connection.

When Enable HDMI

CEC Control in the HDMI

CEC Control

Setup menu is set to On, the following HDMI

CEC Control

functions are enabled.

NOTE