Flat Panel Television User Manual

136

Advanced features

Setting up the Network

Even if an AP for IEEE 802.11n is used when Encryption is set to

WEP or TKIP, the Speed value might be low. We recommend that the

Encryption setting are changed to AES (Under manual setup).

Advanced Network Setup

❖ When the DHCP function of the router connected to this TV is

On, you can set Auto Setup to On or Off. (Usually set it to On.)

❖ When the DHCP function of the router is Off, set Auto Setup to

Off, and manually set the IP Address or DNS Address.

IP Address Setup

The settings in Auto Setup are linked to those selected in the DNS

Setup menu. If Auto Setup is set to On, then Auto Setup in the DNS

Setup menu will also be set to On.

Auto Setup:

1 Press the MENU button. Select NETWORK > Network

Setup, and then press the OK button.

2 Press the ( / arrow) buttons to select Advanced Network

Setup, and then press the OK button.

3 Press the ( / arrow) buttons to select IP Address Setup,

and then press the OK button.

4 Select Auto Setup. Press the ( / arrow) buttons to select

On.

Other items are grayed out when Auto Setup is set to On.

Manual Setup:

1 Press the MENU button. Select NETWORK > Network

Setup, and then press the OK button.

DNS DNS’s address

Item: Description:

NOTE