Operation Manual
31
CONTROLS AND FEATURES
English
There are three types of view modes.
Multi View
This view allows you to search for photos in the grid.
These pictures are displayed by use of thumbnail data in each
picture.
The initial highlighted position will be on the top left thumbnail
in the Multi View.
a
Press
B
b
C
c
to move the highlight in one window.
If all of the photo contents will not fit in one screen,
when pressing
C
at the top left thumbnail, the screen
will move to the previous page. At this time, the
highlight shall be the content at the bottom right.
Conversely, when pressing
c
at the bottom right
thumbnail, the screen will move to the next page. At
this time, the highlight shall be the content at the top
left.
P
U
P
u
buttons can be used to page up/down the
photo list when there are more contents than will fit
onto one screen. When the
P
U
P
u
buttons are
pressed, the highlight shall be the content at the top
left of Previous/Next list.
b
When you select a folder, press
Q
to move to the next
layer. Press
RETURN
to move back to the previous
layer.
c
Press
Q
to move to the Single View mode and play
the selected photo content.
Single View
In this view mode, only contents located in the selected
directory shall be played. This view allows you to change the
photo content manually. When moving from Multi View to the
Single View, the selected photo content shall be played.
a
Press
c
to view the next photo content. Press
C
to view
the previous photo content.
b
Press
B
to rotate the image 90° clockwise. Press
b
to
rotate the image 90° counterclockwise.
c
Press to display file status information (content
number, photo title, shooting date and time,
resolution etc.). The information will be removed by
time-out (about 6 sec) or pressing again.
Slideshow
This view allows you to watch the slide show of the photos. In
this view mode, only files located in the selected directory shall
be played.
a
To start slideshow, press
Q
in the Single View mode.
b
Press
C
/
c
to view the previous/next photo content.
c
Press
B
or
b
to rotate the photo.
d
Press to display file status information. The
information will be removed by time-out (about 6 sec)
or pressing again.
To set Interval time and Repeat setting:
a
Press
QUICK
to open the
Quick Menu
.
b
Press
B
or
b
to select either
Interval Time
or
Repeat
.
c
Press
C
or
c
to adjust the setting and press
Q
.
To close the Photo Viewer
a
Press
EXIT
. The television will return to the last viewed
channel or external input.
Viewing photo files
Photo
/Folder
1/54
E05265464.jpg
Page BackSelect
OK P RETURN
Quick Menu
Repeat
Interval Time 3sec
On