System information

79
CONTROLS AND FEATURES
English
TOSHIBA may offer upgrades for the TV’s software in the future.
The TV’s software is upgraded via the Network.
Before downloading software;
Configure your TV to connect to the Internet.
NOTE: While the upgrade is being performed, you will not be
able to watch the TV.
a In the System Setup menu, press B or b to select
Software Upgrade and press OK.
b Press B or b to select Network Upgrade and press
OK.
NOTE: If the network is not available, a warning
message will appear.
c The TV software upgrade will start when download
succeeds.
The licences for the software used in this television are available
for viewing.
a In the System Setup menu, press B or b to select
Software Licences and press OK.
A screen will appear displaying all the licensing
information required for the televisions software.
System Information and Reset TV
This feature can be used to check the version of software
currently installed. When in DTV mode, it includes additional
diagnostic information such as signal strength, signal quality,
centre frequency, modulation, etc.
a In the System Setup menu, press B or b to select
System Information.
b Press OK to display the System Information.
c For information about the signal quality of a particular
multiplex, press
B or b to select that multiplex.
d Press OK for a screen showing detailed technical
information about the selected multiplex.
Selecting Reset TV will reset all TV settings, including saved
channels, to their original factory values.
a In the System Setup menu, press B or b to select
Reset TV.
b Press OK to select. A screen will appear warning that
all settings will be lost. Press OK to continue.
When the set powers back on, the Quick Setup
screen will appear. Press OK to advance the setup and
perform an auto tune. (See “Quick Setup” section on
page 18.)
Network Upgrade
Software Licences
System Information
Reset TV
System Information
2011
2.1.26.0 Feb 19 2011 - 15:56:50 FW:13
WEAK
Ch25
Good
AVERAGE STRONG
TOSHIBA