Flat Panel Television User Manual

104

Basic features

Setting the timer to turn on the TV

You can set the on timer to turn on the TV to a preset channel or

input at a preset time.

To activate the timer:

1 Press the MENU button. Select TIMERS, On Timer, and

then press the OK button.

2 Press the ( / arrow) buttons to select Enable On Timer.

3 Press the ( / arrow) buttons to select On.

If the Enable On Timer is set to Off, other menus under On Timer

cannot be changed.

It can take the TV approximately 60 seconds to turn on through the

ON TIMER feature.

To set the timer:

1 Press the MENU button. Select TIMERS, On Timer, and

then press the OK button.

2 Set these options to your preference:

3 Select Done, and then press the OK button.

If you do not operate the TV for 1 hour after it is powered on by the

On Timer feature, it turns off.

To cancel the timer:

1 Press the MENU button. Select TIMERS, On Timer, and

then press the OK button.

Item: Description:

Input Video input source

Channel Channel to view

Volume Volume level

Time until Power On Desired length of time until the TV turns on:

minimum=00:10, maximum=12:00

Press the ( / arrow) buttons

Use the number buttons

NOTE