Operation Manual

11
TUNING THE TELEVISION
Tuning the television
Before switching on the television put your decoder
and media recorder to
Standby if they are
connected.
To set up the television use the buttons on the
remote control as detailed on page 6.
a Connect the television to the mains power and press
the
1 button. The Quick Setup screen will appear.
b Using Y or y select your language , then press Q .
c Then press Y or y to select your country and press
Q .
d To start Auto tuning press Q .
The search will begin for all available stations.
The slide bar will move along the line as the search
progresses.
You must allow the television to complete the
search.
When the search is complete the television will
automatically select programme position 1. This may
not be a clear picture or the signal may be weak, so
the station order can be changed using
Manual
tuning
which will appear on the screen.
e With the list of stations now showing use > or < to
highlight the station you want to
move and press y .
The selected station will be moved to the right of the
screen.
f Use > or < to move through the list to your
preferred position. As you do so the other stations will
move to make room.
g Press Y to store your move.
Repeat as necessary, then press
P .
If the television cannot be connected to a media
recorder/decoder with a SCART lead or if a station on
another
system is required, use Manual tuning to
allocate a programme position,
see page 12.
Quick Setup
Quick Setup
Select your language.
Language English
EXIT
Watch TV
OK
Next
Auto tuning
Searching
Channel : C22 Station : BBC1
EXIT
Stop
1 C22 BBC1
2 C28 BBC2
3C25ITV
4 C32 CH4
5C68
6C69
OK
MENU EXIT
Manual tuning
Prog. Channel Station
Select Sort
Back Watch TV
Manual tuning
Prog. Channel Station
1 C22 BBC1
2 C28 BBC2
3 C25 ITV
4 C32 CH4
5C68
6C69
Store
MENU
Back
EXIT
Watch TV
00GB_AV500P_EngOM.book Page 11 Tuesday, December 11, 2007 5:40 AM