Operation Manual

68
English
Q
:h\ are the colours wrong when an
176C source is pla\ed"
A
Connect the NTSC source via a SCART
cable and play. Select Manual setting
from the SETUP menu and set the Col-
our System to Auto.
Manual setting
EXT 1 A
Colour system: Auto
Select Change
OK
Save
RETURN
Back
Q
:hat can be done if the user-de¿ned
password has been forgotten"
A
Use the universal password 1276, then
change to a new number of your choice.
Q
:h\ don¶t the devices connected via
+D0I operate properl\"
A
Make sure to use cables with the HDMI
logo (
®
). Some early HDMI
equipment may not work properly with
the latest HDMI TV products, due to
adoption of new standards.
Q
:h\ is the 0edia 3la\er/D9D picture in
blacN and white"
A
Check the correct input has been cho-
sen: S-VIDEO or AV.
Q
:h\ did 79 turn off b\ itself"
A
After roughly 15 minutes without any
input video signal at TV mode, the TV
will turn off to reduce power.