Manual

Usingthe advancedpicture
settingsfeatures
UsingDynamicContrast
Dynamic Contrast detects changes in picture quality
that affect the appearance of your contrast settings
and then automatically adjusts the video.
To select Dynamic Contrast preference:
1 From the the Picture menu, highlight Picture
Settings and press @.
2 Highlight Advanced Picture Settings and press @.
3 Press & or V to select Dynamic Contrast.
4' Press 4 or _ to select High, Nidd]e, L0w and Off.
Usingthe static gamma feature
Tile static gamma feature allows y_.)uto adjust the
levels of black in the picture.
To adjust the static gamma settings:
MENU
Press © and open tile Picture menu.
Highlight PictureSettingsand press @.
3 Highlight AdvancedPictureSettingsand press @.
* [n the Static Gamma field, press 4 or _ to
adjust the static gamma.
The adjustment range is within _+5from center.
. if the setting is moved in the minus direction,
the detail of black colors will be decreased.
. if the setting is moved in the plus direction, the
detail of black colors will be increased.
To save the new settings, highlight [}one and
press @.
To revert the factory defaults, highlight Reset
and press @.
Note: If you select one of the factory-set
picture modes (Sports, Standard, Movie
or PC) and then change the static gamma
setting, the picture mode automatically
changes to Preference.
Selectingthe colortemperature
You can change tile quality of tile picture by selecting
from three preset color temperatures (Cool, Medimn,
and Warm), as described below.
Cool blueish
Medium neutral
Warln reddish
To select the color temperature:
MENU
1 Press O and open the Picture menu.
Highlight Picture Settings and press E_@.
Highlight Advanced Picture Settings and press @.
4. Highlight C0J0r Temperature and press @.
5
[n the CoJorTemperaturefield, press "9 or _ to select
the mc_.teyou prefer (Cool Nedinm, or Warm).
6 Press A or V to select either [3[}rive or G [}rive,
and then press 4 or _ to adjust the settings.
• B Drive: _ makes the picture blueish.
• G Drive: _ makes the picture greenish.
Note: The B Drive and G Drive settings
are connected to the Color Temperature
settings and will change based on which
setting is selected in step 5 above.
7 Tosave the new settings, highlight Doneand press @.
To revert to the factory defaults, highlight Resel and
press @.
Note: If you select one of the factory-set
picture modes (Sports, Standard, Movie, or
PC) and then change the color temperature
mode, the picture mode automatically
changes to Preference.
51