Manual

To turn on the auto aspect ratio feature:
MENU
Press O and open the Picturemenu.
2 Highlight TheaterSettingsand press _.
3 [n the Auto Aspect Ratio field, select 0u.
4 To save the new settings, highlight [}oRe and press
@. To revert to the factory defaults, highlight
Resetand press @.
To turn off the auto aspect ratio feature:
Select 0fl in step 3 above.
SelecUngthe cinemamode
When you view a DVD (3:2 pulldown processed)
from a DVD player connected to the Vl[}E0 1, VI[}E02,
C010rStreamHD(component video), or H[}NI inputs
on the TM smoother motion can be obtained by setting
theCinemaNodetoFilm.
To set the Cinema Mode to Film:
(available for 480i and 1080isignals)
MENU
Press O and open the Picture menu.
Highlight Theater Settings and press _.
3 [n the CinemaNodefield, select Film.
4 To save the new settings, highlight [}0ue and press
@_. To revert to the factory defaults, highlight
Resetand press @.
To set the Cinema Mode to Video:
Select Video in step 3 above.
Usingthe FREEZEfeature
To use the FREEZE feature:
FREEZE
1 When viewing the TV, press ISSSSSSS]to make the
picture a still picture.
• FREEZE
To return to the moving picture, press ESSZ]
again (or any other button).
Note: If the TV is left in FREEZE mode for
more than 15 minutes, the FREEZE mode
will automatically be released and the TV will
return to moving picture.
Using the FREEZE function for any purpose
other than your private viewing may be
prohibited under the Copyright Laws of the
United States and other countries, and may
subject you to civil and criminal liability.
Adjustingthe picture
SelecUngthe picturemode
You can select your desired picture settil'Jgs from four
different modes, as described below.
Bright and dynamic picture (factory
Sports setting)
Standard Standard picture settings (factory
setting)
Lower contrast for darkened room
Movie
(factory setting)
PC Designed for viewing of PC tables
and documents
Preference Your personal preferences
Note: PC mode is available for HDMI and PC
inputs only (grayed out for other input sources).
To select the picture mode using the menu
system:
MENU
1 Press O and open the Picture menu.
Highlight Node and press _.
3 Press ,A or V to select the picture mode you
prefer and press _E._.
Note: The picture mode you select affects
the current input onl_/ You can select a
different picture mode for each input.
(contin t_ed)
38