Manual

Connectinga VCRand antenna, CableTV orCamcorder
TV back panel
FromCableTV or FromCableTV
VIDEO 2 inputs
onTV right side panel
You will need:
., coaxial cables
., standardA/V cables
- If you have a mono VCR, connect L/MONO
on the TVto your VCR's audio out terminal
using the white audio cable only
., standardaudiocables(If you have a mono VCR)
Note: When you use a Cable box, you may not
be able to use the remote control to program or
access certain features on the TX
To view the antenna or Cable signal:
Select the ANT/CABLE video input source on the TV._
To view basic and premium Cable channels:
Turn OFF the VCR. Select the ANT/CABLE video
input source oll the TV?_Tune the TV to channel 3 or
4 (whichever channel the Cable box output is set to).
Use the Cable box controls to change channels.
To view the VCR:
Turn ON the VCR. Select the VIDEO1 video input
source on the TV. '_
To view the camcorder video:
Select the VIDEO2 video inputsource on theTV.'_
:,- To select the video input source, press iNPUT on the
remote control (,_ page 21 ).
Theunauthorizedrecording,use,distribution,or
revisionoftelevisionprograms,videotapes,DVDs,
and othermaterialsis prohibitedunderthe Copyright
Lawsofthe UnitedStatesandother countries,and may
subjectyoutocivil and criminalliability.
14