Operation Manual

79
English
CONTROLS AND FEATURES
When connecting a surround sound amplifier to the digital
audio output (Sony/Philips Digital Interface Format [S/
PDIF]), the following options can be selected or adjusted.
a In the Sound menu, press B / b to select Digital
Audio Output and press OK.
b Press B / b to select an option.
Audio Format
Press
C / c to select PCM or Auto.
PCM: This mode outputs PCM format to the digital
audio output socket.
Auto: This mode outputs Dolby Digital (if
available) or PCM to the digital audio output
socket.
Dolby Digital
S Dolby Digital
Dolby Digital Plus
S Dolby Digital
MPEG
S PCM
HE-AAC
S Dolby Digital
Audio Delay
Press
C / c to select Auto or Manual.
Auto: This mode automatically adjusts the audio
timing to meet the video timing.
NOTE: The time lag might be large
between the image and sound depending
on the connected equipment (amplifier
etc.). In that case, select Manual.
Manual:You can manually adjust the audio signal
timing to meet the video signal timing.
Delay Adjustment
Press
C / c to adjust the audio signal timing
(0 – 250 ms) to meet the video signal timing.
NOTE:
• This feature is greyed out when Audio Delay is
in Auto.
• A time lag will occur when the video signal or
audio signal is changed. Adjust the timing
accordingly.
• When adjusting the timing, turn down the volume
of the AV equipment used as far as possible.
Depending on the equipment, noise etc. may
occur when the signal is changed.
• Depending on the connected equipment
(amplifier, etc.), adjustment may not be possible.
• When the optical digital output setting
(Auto
tPCM) is changed, it may be necessary
to adjust the timing again.
• Do not use other than for audio output from the
AV amplifier, etc. (Malfunction may occur)
Digital Audio Output
< Sound
Balance 0
Bass 0
Treble 0
Advanced Sound Settings
Stable Sound
Dynamic Range Control On
Dual Dual 1
Audio Level Offset
TV Speakers On
Headphone Level
Audio Description
Digital Audio Output