Operation Manual

21
English
SETTING UP YOUR TV
From the System Setup menu, you can add the satellites
that you wish to tune and configure detailed settings for
each one individually.
To add a satellite:
a Press and B / b to highlight Installation
icon.
b Press c and B / b to select Channel Tuning and
press OK.
c Press b to select Satellite Settings and press
OK.
d Press b to highlight a new line to add an another
satellite and press OK.
e Press b until the required satellite is displayed and
press OK.
To delete a satellite:
a In the Satellite Settings menu, press B / b to
select the satellite you want to delete.
b Press the RED button. A confirmation window will
appear.
c Press C / c to select Yes and press OK.
NOTE: It is not possible to delete position No.1.
To edit the satellite settings:
a In the Satellite Settings menu, press B to
highlight Switch Type.
b Press C / c to select None, ToneBurst, DiSEqC
2way, DiSEqC 4way or Single Cable as your
satellite switch type.
c Press b to highlight LNB Power and press C / c
to select On or Off.
To add a transponder:
a In the Satellite Settings menu, press B / b to
highlight the line you want to edit and press OK.
b Press the GREEN button. The Transponder
Settings screen will appear.
c Press B to highlight a new line.
d Press OK .
e Edit each parameter as required and press OK .
Satellite Settings
1 Astra 19.2E 1 1
2
3
4
Satellite Settings
Switch Type
LNB Power
None
On
No. Satellite
Dish
LNB
Done
Transponder : 1/120 (10729) MHz
Dish Type : Fixed
Lower LOF : 9750
Upper LOF : 10600
1 Astra 19.2E 11
Transponder Settings
Frequency
1 10743 H 22000 S
2 10773 H 22000 S
3 10788 V 22000 S
4 10817 V 22000 S
5 10832 H 22000 S
6 10847 V 22000 S
7 10861 H 22000 S
8 10876 V 22000 S
Polarisation Symbol Rate S/S2
Transponder Settings
Frequency
76 12640 H 22000 S
77 12662 H 22000 S
78 12669 V 22000 S
79 12692 H 22000 S
80 12699 V 22000 S
81 12721 H 22000 S
82 12728 V 22000 S
83
Polarisation Symbol Rate S/S2
83 0 H 0 S
83 1231 H 0 S2