Operation Manual

63
English
Frequently Asked Questions
Q
Why is there no sound or picture?
A
Check that the television is on and that
all connections are made properly.
Q
There is a picture, but why is there little
or no colour?
A
The colour is factory set to Auto to auto-
matically display the best colour system.
When using an external source, if there
is little or no colour, improvements may
sometimes be achieved.
To manually change the colour system:
With the external source playing, select
Manual setting in the SETUP menu.
Using Ÿ or ź to choose from Auto,
NTSC 4.43, NTSC 3.58, SECAM or
PAL.
Manual setting
EXT 1 A
Colour system: Auto
Select Change
OK
Save
RETURN
Back
Q
Why doesn’t the video/DVD being
played show on-screen?
A
Make sure the Media player or DVD
player is connected to the television, then
select the correct input by pressing
.
Q
Why is there a good picture but no
sound?
A
Check all cable connections and that
the volume has not been turned down or
that the sound has not been muted.
Q
What else can cause a poor picture?
A
Interference or a weak signal. Try a
different television station. Manual ¿ ne
tuning may help:
Select the ATV Manual Tuning in the
SETUP menu.
Highlight the station and press
, then
press Ż or Ź to select Manual ¿ ne
tuning.
Select Change
OK
Save
RETURN
Back
ATV Manual Tuning
Position
1 DK A C 69 0 −−−−−
Using Ÿ or ź to adjust to get the best
picture and sound. Press
and then
RETURN.
Q
Why doesn’t the remote control work?
A
Check that the batteries aren’t exhaust-
ed or inserted incorrectly.
Q
Why are there problems with text?
A
Good performance of text depends on
a strong broadcast signal. If the text is
unreadable or garbled, check the aerial,
satellite or cable connection. Go to the
main index page of the text service and
look for the User Guide. This will explain
the basic operation of text in some
detail.
Q
Why are the four coloured text numbers
visible but no text (Analogue Only)?
A
Text has been selected while viewing
an external source. No text will appear
on-screen or a box may appear stating
no information is available. Select a
broadcasting channel and press
to
access.