LCD Color TV Owner's Manual

19
Using the TV’s features
Selecting the woofer internal/external
mode
1
Press M, then press Y or y to display the SET UP menu.
2 Press < or > to select AV connection, then press Q
to display the AV connection menu.
3 Press < or > to select Woofer, then press Y or y to
select Internal or External.
• Internal is to use the bass boost.
• External is to use an external woofer system.
Using the bass boost
1
Select the woofer Internal mode as shown above.
2 Press t to display Bass boost level.
3 While the Bass boost display is on the screen, press Y
or y to adjust the Bass boost level.
4 To turn off the Bass boost, press t to display Bass
boost Off.
Note:
The Bass Boost effect is active only when the sound outputs
from the speaker or an external woofer system.
Using an external woofer system
Connect an external woofer to the WOOFER output terminal
located on the rear of the TV (- page 25).
1 Select the woofer External mode from the AV
connection menu.
2 Press
t
to display External Woofer level, then press
Y or y to adjust the External Woofer level.
3 To turn off the External Woofer, press t to display
External Woofer Off.
Selecting the audio output
With the audio output function “Variable”, you can use the
TV’s remote controller to adjust the sound volume of the
external audio system connected (- page 25).
To select the sound volume from AUDIO OUT
terminals:
1 From the AV connection menu, press < or > to select
Audio output.
2 Press Y or y to select Variable or Fixed.
Note:
Make sure the volume control of your audio amplifier is set to a
moderate listening level.
Other features settings
Selecting the timer menu
The Timer is especially useful if you want the TV to turn itself
on or off after a selected period of time.
1 Press M, then press Y or y to display the TIMER menu.
2 Press < or > to select the required timer mode (Sleep
timer (Turn off the TV) or On timer).
The timer display will set by 10 minutes, up to 12 hours
and 50 minutes.
3 Press the Number buttons (0-9), Y or y to set the On or
Off delay time, e.g. on in 30 minutes and On timer
Position 3 selected.
4 Press P to exit the menu. When setting the On timer,
press < or > to select the On timer Position and enter
the program position number you want to watch. Set the
Standby mode by pressing J on the remote control or 1
on the TV.
Activation of the Timer is indicated by the green “On-
timer indicator”, on the front of the TV (- page 8).
Notes:
• The TV will automatically turn itself off after approximately 2
hours if you do not operate the TV after turned on by on timer
function.
• If you press and hold
Y or y to set the On or Off delay time,
the timer display will set by 30 minutes, up to 12 hours 30
minutes.
Picture position
AV connection
Manual tuning
OK
OK
OK
Auto tuning
OK
Language
SET UP
MENU
Back Watch TV
EXIT
English
MENU
Back Watch TV
EXIT
PC/HDMI1 audio
HDMI1 audio
AV connection
PC
Woofer
External
Audio output
Fixed
Digital
Bass boost 70
Bass boost Off
External Woofer 70
External Woofer Off
TIMER
MENU
Back Watch TV
EXIT
Sleep timer
00:00
On timer Position
On timer
00:30
03