Operation Manual

15
ATV manual tuning (continued),
programme skip, programme sort
Press OK to store.
Repeat for each programme position you want
to tune or, press MENU to return to the list of
channels and select the next number to tune.
Press EXIT when you have finished.
To name external equipment, e.g. DVD on EXT2,
press
B
to select
B
2, then select Manual
Setting from the SET UP menu.
Press
R
to select Label then using P, Q,
S
and
R
put in the required characters. Press OK.
10
11
12
13
9
Manual tuning
Station: VCR
0 I A C 60 0 V C R
Manual tuning
Skip: On
2
I A C 28 0 B B C 2
Manual Setting
Label: DVD
EXT2 A D V D
Manual Tuning
Prog. Channel Station
2 C28 BBC2
3 C25 ITV
4 C32 CH4
5 C68 C-68
6 C69
7 C69
8 C69
9 C69
Manual Tuning
Prog. Channel Station
2 C28 BBC2
3 C25 ITV
4 C32 CH4
5 C68 C-68
1 C22 BBC1
6 C69
7 C69
8 C69
PLEASE NOTE
This television has direct channel entry if the channel
numbers are known. Select the ATV Manual Tuning screen
in Step 3. Enter the Programme number, the System, then
C for standard (terrestrial) channels or S for cable channels
and the Channel number. Press OK to store.
Press MENU and repeat from Step 2 or press
EXIT.
Each programme position has to be individually
selected. To turn Skip off, repeat the procedure
for each position.
Skipped programme positions cannot be selected
by P e and P f or by the controls on the
television, but can still be accessed by the number
buttons on the remote control.
3
4
5
Use P or Q to highlight the programme position
to be skipped and press OK to select.
Press
R
to select Skip.
Use P or Q to turn Skip on. Press OK.
on the screen indicates a skipped
programme position.
To prevent certain programmes from being viewed, the
programme position can be skipped. The remote control
must be removed as the channels will still be available using
the number buttons . Programmes can then be watched as
normal using the controls on the television, but the television
will not show the skipped programme position.
Programme Skip
Sorting Programme Positions
Select ATV Manual tuning from the SET UP
menu.
1
2
Channels may be moved and stored on the programme
position of your choice.
Select ATV Manual tuning.
With the list of stations showing use Q or P to
highlight the station to be moved and press
R
.
The selected station will be moved to the right of
the screen.
1
2
3
4
Use Q or P to move through the list to your
preferred position. As you do so the other stations
will move to make room.
Press
S
to store your move. Repeat as necessary,
then press EXIT.
gpg