Flat Panel Television User Manual

23
Controlling other devices
The TV’s remote control can operate other devices
such as cable converter boxes, satellite receivers, VCRs,
DVD players, and HTIBs (home theater in a box).
Toshiba devices:
The remote is programmed to operate a variety of
devices ( page 79).
Non-Toshiba devices or Toshiba devices that the
remote control is not programmed to operate:
Program the remote ( page 79).
Installing batteries
1無
Pull up to open the cover.
2無
Install two AA size carbon zinc batteries.
Note: Use carbon zinc batteries or alkaline
batteries.
3無
Slide on the cover.
Caution: Do not expose batteries to excessive
heat such as sunshine, fire, or the like.
Note:
•
Every time you change the batteries, you must
reprogram the remote.
•
Dispose of batteries in a designated disposal area.
•
Always consider the environment when disposing
of batteries. Always follow applicable laws and
regulations.
•
If the remote does not operate correctly, or if the
operating range is reduced, replace the batteries.
•
Always replace both batteries with new ones.
Never mix battery types or use new and used
batteries together.
•
Always remove batteries from the remote if they are
dead or if the remote control is not to be used for
an extended period of time. This prevents battery
acid from leaking into the battery compartment.
Remote control effective range
For optimum performance, aim the remote control
directly at the TV and make sure there are no
obstructions between the remote control and the TV.
24” / 32”
16.4 ft (5m)
Point remote control toward
remote sensor on front of TV.
40”
16.4 ft (5m)
Chapter 3: Using the remote control
Point remote control toward
remote sensor on front of TV.