Flat Panel Television User Manual

45
Chapter 6: Using the TV’s features
Using the Dolby
®
Digital Dynamic
Range Control feature
This dynamic range control feature causes the ATSC
dynamic range to be further compressed, allowing
you to switch from ATSC to analog broadcasts at the
same dynamic range.
To use the Dolby Digital Dynamic Range
Control:
1無
Press and open the Audio menu.
2無
Highlight Audio Setup and press .
3無
In the Dolby Digital Dynamic Range Control field,
select Compressed. When Standard is selected,
the audio is output with minimal compression.
4無
To save the new settings, highlight Done and
press .
To revert to the factory defaults, highlight Reset
and press .
Note:
•
This item will be grayed out for NTSC signals,
Video, ColorStream, and PC inputs.
•
The Dolby Digital Dynamic Range Control will
function in relation to Optical Output Format
(PCM mode).
Using the Locks menu
The Locks menu includes the Enable Rating
Blocking, Edit Rating Limits, Channels Block, Input
Lock, Front (control) Panel Lock, and New PIN Code
features. You can use these features after entering the
correct PIN code.
Entering the PIN code
1無
Press and highlight the Locks menu icon.
2無
Press q, which displays the PIN code entry
screen.
•
The Lock System screen (below) appears if a
PIN code has not been stored. Press the Channel
Number buttons to enter a new four-digit code,
enter the code a second time to confirm, and
press .
•
The Locks/Active screen appears if the PIN code is
already stored. Use the Number buttons to enter your
four-digit code and press .
If the wrong PIN code is entered, the message
“Incorrect PIN code, please try again!” appears.
Highlight Retry and press . Enter the code again
and press .
When the correct PIN code is entered, the Locks menu
opens.
If you cannot remember your PIN code
While the PIN code entering screen is displayed, press
four times within five seconds. The PIN code will
be cleared and you can enter a new PIN code.
Changing your PIN code
1無
Press and highlight the Locks menu icon.
2無
Press q to display the PIN code entering screen.
3無
Enter your four-digit PIN code and press .
4無
Press q to highlight New PIN Code and press .
5無
Press the Number buttons to enter a new four-
digit code. Reenter the PIN code to confirm it.
6無
Press . The new PIN code is now active.
Blocking TV programs and movies
by rating (V-Chip)
Some TV programs and movies include signals that
classify the content of the program (violence, sex,
dialog, language). The V-Chip feature in this TV
detects the signals and blocks the programs according
to the ratings you select. (For rating descriptions, see
the tables on the next page.)
(continued)