Color Television Owner's Manual 26HF86C, 30HF86C

35
Appendix
Using the TV’s
Features
Setting up
your TV
Using the
Remote Control
Connecting
your TV
Welcome to
Toshiba
Important
Safeguards
Selecting the color temperature
Change the picture quality by selecting from three preset color tem-
peratures—cool, medium, and warm—as described in the following
table:
To select the color temperature:
1. Press MENU, then press
or to display the PICTURE menu.
2. Press ▲ or ▼ to highlight COLOR TEMPERATURE.
3. Press
or to highlight the mode you prefer.
4. Press EXIT to return to normal viewing.
Using the CableClear
®
feature
CableClear
®
reduces visible interference in your TV picture. This
is useful when receiving a broadcast with a weak signal (especially a
Cable channel) or playing a video cassette or disc damaged by
repeated use.
To turn on the CableClear
®
feature:
1. Press MENU, then press or to display the PICTURE menu.
2. Press ▲ or ▼ to highlight CableClear.
3. Press or to select ON.
To turn off the CableClear
®
feature:
Select OFF in step 3.
Selecting the Scan Velocity Modulation (SVM)
The SVM feature enhances picture contrast and sharpness. This
feature has three modes: HIGH, LOW, and OFF.
To select the SVM feature:
1. Press MENU, then press
or to display the PICTURE menu.
2. Press ▲ or ▼ to highlight SVM.
3. Press or to select the mode you prefer.
To turn off the SVM:
Select OFF in step 3.
Mode Picture Quality
COOL Blueish
MEDIUM Neutral
WARM Reddish
Menu
Exit
PICTURE
CableClear
COLOR
TEMPERATURE
DISPLAY FORMAT
SVM
RESET
:SELECT :ADJUST
ONCOOL
COOL
COOL / MEDIUM / WARM
1080i
HIGH
Note:
SVM is not required when viewing some
high-quality video material. If you are
watching high-quality video material, you may
want to set SVM to OFF.
PICTURE
CableClear
COLOR
TEMPERATURE
DISPLAY FORMAT
SVM
RESET
:SELECT :ADJUST
ON
COOL
1080i
HIGH
HIGH / LOW / OFF
PICTURE
CableClear
COLOR
TEMPERATURE
DISPLAY FORMAT
SVM
RESET
:SELECT :ADJUST
ON/OFF
COOL
1080i
HIGH
Using the TV’s
Features
J3S40421A(E)_P30-36 21/12/05, 2:40 PM35