Contents Locking a Channel............................................. 18 Viewing Info Banner, Electronic Programme Guide..................................................................... 19 Viewing Info Banner........................................... 19 Electronic Programme Guide............................ 19 Language Selection............................................... 20 Language Settings............................................. 20 Preferred.................................................
English Language........................................................... 27 Parental............................................................. 27 Timers................................................................ 27 Date/Time.......................................................... 27 Sources............................................................. 27 Other Settings.................................................... 27 Using a Conditional Access Module..................
Safety Precautions Air Circulation Do not Leave more than 10cm around all edges when wall mounting the television to allow adequate ventilation. This will prevent overheating and possible damage to the television. Dusty places should also be avoided. DON’T remove any fixed cover as this may expose dangerous voltages. Heat Damage Damage may occur if the television is left in direct sunlight or near a heater.
Installation and Important Information English Where to install Sturdy tie (as short as possible) P Clip * Button and stand style is dependent on model. P Clip “P” Clip position on TV is dependent on model. Locate the television away from direct sunlight and strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Place the TV on a stable, level surface that can support the weight of the TV.
Important safety information • Even if the television conforms to the DVB-T specifications, the compatibility to future digital DVB-T transmissions is not guaranteed. • Some digital television functions may not be available in some countries. • The DVB-T system present in this device is FTA (Free to air). • DVB is a registered trademark of the DVB Project. This logo indicates that the product is compliant with European Digital Broadcasting.
Removing the pedestal stand English When using a Wall Bracket Please use a wall bracket appropriate for the size and weight of the LCD TV. • Two people are required for installation. • To install a wall-mount from another manufacturer. (1) Unplug and remove any cables and/or other component connectors from the rear of the TV. (2) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. (3) Follow the instructions provided with your wall bracket.
The Remote Control SLEEP SCREEN FAV LANG. PRESETS EPG SWAP SOURCE C DISP. SEARCH MODE INFO CH V 1. Standby 20. Green button 2. Image size 21. Picture mode selection 3. Sleep Timer 22. No function 4. Mono/Stereo - Dual I-II / Current Language (in DVB channels) 23. Teletext / Mix (in TXT mode) 5. No function 24. Subtitle on-off (in DVB channels) 6. Numeric buttons 25. Previous programme 7. Electronic programme guide(in DVB channels) 26. AV / Source selection 8.
Connecting External Equipment English Before connecting any external equipment, remove the mains plug from the wall socket. Side View COMMON INTERFACE The Common Interface is for a Conditional Access Module (CAM). HDMI 1 HDMI Input Socket DIGITAL AUDIO Socket RGB/PC Input Aerial Input SPDIF USB Input 5Vdc Max:500mA SIDE AV Coax.
Connecting an HDMI® or DVI Device to the HDMI Input English The HDMI input on your TV receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device. This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output).
Connecting a Computer Connecting a DVD Player English To Connect a Computer Connecting to a DVD Player via YPbPr With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the TV and hear the sound from the TV’s speakers. Some DVD players are connected through COMPONENT SOCKETS (YPbPr). In this case, you must use the supplied Component YPbPr video connection cable for enabling connection. First, plug the single jack of the cable to the TV’s YPbPr socket (side).
Connecting a USB Memory English To Connect a USB Flash Drive • You can connect a USB Flash Drive to your TV by using the USB input of the TV. This feature allows you to display/play music, photo or video files stored in a USB stick. • It is possible that certain types of USB devices (e.g. MP3 Players) may not be compatible with this TV. • You may back up your files before making any connections to the TV set in order to avoid any possible data loss.
Power Save Mode English Environmental Information This television is designed to consume less energy to save environment. You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy efficiency feauture of this TV. To reduce energy consumption, you should take the following steps: You can use Power Save Mode setting, located in the Picture Settings menu.
Controlling the TV 5Vdc Max:500mA IR receiver Standby LED 5Vdc Max:500mA SIDE AV Up Direction MODE o YPbPr Programme / Volume / AV / Standby On selection switch Down Direction Switching on Using the Remote Control If the standby LED is unlit, check that the mains plug is con- Press the MENU button on the remote control to see the menus. nected to the power and press the middle of the button on the left side of the TV to switch the television on.
Initial Installation English Before switching on the TV, put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected to your TV. To set up the TV, use the buttons on the remote control as detailed on page 7. IMPORTANT: Ensure that the aerial is connected and a Common Interface module is not inserted before switching on the TV for the first time installation. 1. Connect the mains plug and switch the TV to on on using the side control switch.
Initial Installation - continued Auto Tuning English 10. The Auto tuning screen will appear and the television will start to search for available stations. The progress bar will move along the line. You must allow the television to complete the search. The following OSD will be displayed on the screen and the television will search for the selected broadcasts: Auto Tuning As new services are broadcast, it will be necessary to retune the television in order to view them.
Manual Tuning, Analogue Fine Tuning The television can be tuned-in manually using Manual Search feature. English Digital Aerial Manual Search Analogue Manual Search The feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known. The television can be tuned-in manually. For example: if the television cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System.
General Operation English Stereo and Bilingual Transmissions Standby Notifications If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time positions are changed, disappearing after a few seconds. If the broadcast is not in stereo, the word Mono will appear. If the TV switches off while in No Signal mode, the following on-screen message will be displayed on the next switch-on: Stereo… Press LANG. to select Stereo or Mono.
Channel List, Sorting Programmes, Programme Locking English You can view stored channels and sort them by using the Channel List feature. Viewing Channel List • Selected channel is now moved. The channel order may be changed to suit your personal preference. • Select Channel List from the main menu and press OK button. The following menu will be displayed: Deleting a Channel You can press GREEN button to tag/untag all channels; YELLOW button to tag/untag channel.
Viewing Info Banner, Electronic Programme Guide English Viewing Info Banner • Press SUBTITLE button to sort channels by a genre. • Press INFO button. The information screen will appear giving details of the channel and programme currently being viewed. • For information on a highlighted programme, press i button. • Whenever you change channel, the TV displays the broadcast picture along with an information banner at the bottom of the screen (available only in DTV mode).
Language Selection English Language Settings Using this menu you can adjust the preferred language settings. • Press MENU button and select Settings by using Left or Right button. • Select Language from setup menu and press OK to view this menu. Press the RETURN button on the remote control to exit. Preferred These settings will be used if available. Otherwise the current settings will be used. Audio: by pressing Left or Right button change the audio language.
Digital Settings - Parental Control, Menu Lock, Set PIN Viewing Parental Control Menu Maturity Lock (*) Press MENU button and select the Settings by using Left or Right button. Press OK button to view Settings menu. Use Up or Down button to highlight Parental and press OK to continue: When set, this option gets the maturity information from the broadcast and if this maturity level is disabled, disables access to the broadcast. Press MENU button and select Settings by using Left or Right button.
Configuring Picture Settings You can configure picture settings of your TV by using Picture Settings menu. English Configuring Picture Settings Brightness You can use different picture settings in detail. You can customize current picture mode settings as desired. For example, you can change items such as, Brightness, Contrast, Colour, Sharpness and Hue. Sets the brightness value for the screen. Press MENU button and select Picture by using Left or Right button.
Configuring Picture Settings - continued English Dynamic Contrast: You can change contrast rate by using dynamic contrast function. Dynamic contrast can be set to one of these options: Low, Medium, High or Off. Note: The reset function does not reset the settings for Mode, Colour Temp, Noise Reduction, Picture Zoom and HDMI True Black. Colour Temp: Colour Temperature increases the ‘warmth’ or ‘coolness’ of the picture by increasing the red or blue tint.
Changing Picture Format English Press SCREEN button repeatedly to select between Auto(*), 16:9, Subtitle, 14:9, 14:9 Zoom, 4:3 or Cinema. Note: Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for the purposes of public display or commercial gain may infringe on copyright laws. Note: You can shift to screen up or down by pressing “ ”/“ ” buttons while picture zoom is selected as 14:9 Zoom, Cinema or Subtitle.
Configuring PC Picture Settings English PC Picture Settings (*) V Position (*) While in VGA/PC mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture Settings while in VGA/ PC mode. V (Vertical) Position shifts the image vertically towards the top or bottom of the screen. PC Picture controls Contrast, Brightness and Colour Temperature adjustments in this menu are identical to adjustments defined in TV picture menu.
Configuring Sound Settings English You can configure sound settings of your TV by using Sound Settings menu. Configuring Sound Settings Sound settings can be configured according to your personal preferences. Press MENU button and select Sound by using Left or Right button. Press OK button to view Sound Settings menu. Note: Equalizer menu settings can be changed manually only when the Equalizer Mode is in User.
Settings Menu Operation, Conditional Access English Configuring Your TV’s Settings Other Settings Detailed settings can be configured to suit your personal preferences. Viewing Settings Menu Press MENU button and select Settings by using Left or Right button. Press OK button to view Settings menu. Displays other setting options of the TV set.
Setting Timers, Setting Date/Time English Timers Editing a Timer To view Timers menu, press MENU button and select Settings by using Left or Right button. Press OK button to view Settings menu. Use Up or Down button to highlight Timers and press OK to continue: • Select the timer you want to edit by pressing Up or Down button. Setting Sleep Timer The television can be set to turn itself Off after a certain length of time. • Highlight Sleep Timer by using Up or Down button.
Source Settings, Other Controls English Configuring Source Settings Configuring Other Settings - General You can enables or disable selected source options. The TV will not switch to the disabled source options when the SOURCE button is pressed. You can configure the settings of your TV. Select Settings from main menu and press OK to view the Settings menu. Press the MENU button on the remote control to exit.
Other Controls - continued English Blue Background If the signal is weak or absent, the TV will automatically change to a blue screen. To enable this, set Blue Background to On. • In the Other Settings menu, select Blue Background and choose On or Off using Left or Right button. Software Upgrade This feature helps to keep your TV updated. It works automatically and searches for new information when available. Note that this setting is inactive to be modified.
USB Media Browser Manual Start • To display Media Browser window, you can press MENU button on the remote control and then select Media Browser by pressing Left or Right button. • You can also select Media Browser from the Quick button menu. • Only limited types of USB device are supported. Therefore, it is suggested not to use USB for playing Media Player. • Non-supported characters will be replaced with a square (□). • Press OK button to continue.
USB Media Browser - continued This TV allows you to enjoy photo, music or video files stored on a USB memory English Playing MP3 Files Viewing JPEG Files To play mp3 files from a USB memory, you can use this menu screen. To view photo files from a USB Memory, you can use this menu screen. When you select Photos from the main options, available image files will be filtered and listed on this screen. • / : Navigate menu • Play ( button): Starts the playback. • Stop ( button) : Stops playback.
USB Media Browser - continued This TV allows you to enjoy photo, music or video files stored on a USB memory English Slideshow Feature You can use this feature to display photos on your TV. • Pause ( • Continue ( button) : Pauses the slideshow. button) : Continues the slideshow. • Loop/Shuffle (GREEN button): Press once to disable Loop. Press again to disable both Loop and Shuffle. Press once more to enable only Shuffle. Press again to enable all.
USB Media Browser - continued This TV allows you to enjoy photo, music or video files stored on a USB memory English In order to display movie subtitles correctly, you should set a “Movie Subtitle” language. See the section, “Movie Subtitle” in “Language Settings” for selecting Movie Subtitle language. Press RETURN button to switch back to previous menu.
Analogue Only Text Services This television has a multi-page text memory, which takes a few moments to load. English Before using the text services, the required language region must be chosen. • Select Language from the Settings menu. • Press the Left or Right button to choose the required language region. • After the Teletext language is selected, press MENU button to exit. Using Text Button -TXT • To view text services press TXT. Press TXT again to superimpose text over a normal broadcast picture.
Appendix A: PC Input Typical Display Modes English The following table is an illustration of some of the typical video display modes. Some, due to the display native resolution, are scaled automatically to enable correct image to be displayed. Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.
Appendix B: AV and HDMI Signal Compatibility (Input Signal Types) EXT-1 (SCART1) EXT-1 (SCART2) Side AV Supported Signals Available PAL O NTSC 60 O RGB 50/60 O SECAM O PAL O NTSC 60 O SECAM O PAL 50/60 O NTSC 60 O SECAM 480I YPbPr HDMI 60Hz O O 480P 60Hz O 576I 50Hz O 576P 50Hz O 720P 50Hz O 720P 60Hz O 1080I 50Hz O 1080I 60Hz O 480I 60Hz O 480P 60Hz O 576I 50Hz O 576P 50Hz O 720P 50Hz O 720P 60Hz O 1080I 50Hz O 1080I 60Hz O 24Hz 25Hz
Appendix C: PIN Information English Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket. Signal information for Mini D-sub 15 pin connector Pin No. Signal name Pin No. Signal name Pin No.
Appendix D: Supported File Formats for USB Mode Movie Extension Format Notes Video Audio dat, mpg, mpeg Mpeg1,2 MPEG1/2 Layer 1/2/3, AAC/HEAAC, AC3/EAC3, LPCM/ADPCM 1080P@ 30fps 50Mbit/ sec dat, mpg, mpeg MPEG2 ,H.264, VC1, AVS, MVC MPEG1/2 Layer 1/2/3, AAC/HEAAC, AC3/EAC3, LPCM/ADPCM H.264:1080Px2@25fps 1080P@ 50fps MVC: 1080P@ 24fps Other: 1080P@ 30fps” 50Mbit/ sec .vob MPEG2 MPEG1/2 Layer 1/2/3, AC3, LPCM 1080P@ 30fps 50Mbit/ sec .
Specifications and Accessories English Broadcast Systems/Channels DVB-T, MPEG2, DVB-T, MPEG4 HD DVB-C, MPEG2, DVB-C, MPEG4 Video Input PAL, SECAM, NTSC 4.
License Information • DVB is a registered trademark of the DVB Project. • [1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high-definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the television. MP3 licence letter MPEG Layer-3 audio coding technology licensed from Fraunhofer LLS and Thomson.
Q & A Section English Sound Picture General Question Answer Why is there no sound or picture? "Check the TV is not in standby mode.
English EU Conformity Statement This product is carrying the CE-Mark in accordance with the related European Directives. Responsible for CE-Marking is TOSHIBA TELEVISION CENTRAL EUROPE Sp. z o.o., ul. Pokoju 1 Biskupice Podgórne 55-040 Kobierzyce, Poland This product is labeled with the CE Mark in accordance with the related European Directives, notably Low Voltage Directive 2006/95/EC, Electromagnetic Compatibility Directive 2004/108/EC and RoHS Directive 2011/65/EU.