Introduction 15-inch Diagonal LCD TV/DVD COMBINATION * Connections Basic setup TV operation 15DLV76 Basic playback Advanced playback OWNER’S MANUAL Function setup Others ©2006 Toshiba Corporation Before operating the unit, please read this manual thoroughly. *Screen size is approximate.
Introduction CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFEGUARDS Introduction 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS All operating and use instructions should be followed. 5. CLEANING Unplug this unit from the wall outlet before cleaning.
Introduction IMPORTANT SAFEGUARDS (continued) 13. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. However, if there is thunder or lightning now, do not touch the unit and any connected cable. This will for you not to receive the electric shock by the serge of thunder. 14.
Introduction 19. REPLACEMENT PARTS When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 20. SAFETY CHECK Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition. 21.
Introduction Precautions Notes on handling ■ Do not shock the LCD panel. It may cause unit damage and malfunction. ■ When shipping the unit, the original shipping carton and packing materials come in handy. For fully protection, repack the unit as it was originally packed at the factory. ■ Do not use volatile liquids, such as insect spray, near the unit. Do not leave rubber or plastic products to contact the unit for prolonged period. They will leave marks on the finish.
Notes on discs On handling discs Structure of disc contents Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. Video CDs and Audio CDs are divided into tracks. DVD video disc Introduction Do not touch the playback side of the disc. For example, handle the disc so that it is shown in figure below. DVD video disc Title 1 Chapter 1 Title 2 Chapter 2 Chapter 1 Chapter 2 Chapter 3 Playback side Do not attach paper or tape to discs.
Introduction Notes on discs (Continued) About this owner’s manual This owner’s manual explains the basic instructions of this unit. Some DVD video discs are produced in a manner that allows specific or limited operation during playback. As such, the unit may not respond to all operating command. This is not a defect in the unit. Refer to instruction notes of discs. Playable discs This unit can play the following discs. Disc Mark Contents Disc Size Maximum playback time Approx.
Contents Basic playback IMPORTANT SAFEGUARDS ............................ 3 Precautions ....................................................... 6 Notes on discs ................................................... 7 Contents ............................................................ 9 Identification of controls .................................. 10 Playing a disc .................................................. 31 Connections Antenna connections .......................................
Introduction Identification of controls See the page in for details.
Adjusting the angle of the base Approx. 15° Left Side Right Side You can adjust the angle of the TV-screen for 5° forward or for 15° backward from vertical angle. Hold the base of the TV while adjusting the angle. Disc slot PHONES jack AUDIO IN (L/R) /VIDEO IN (LINE 2 IN) jacks Approx.
Introduction Identification of controls (Continued) Remote control The instructions in this manual describe the function on the remote control. See the page in EJECT button 32 TV/DVD button 31 for details.
Inserting batteries 1 2 Install two “R03/AAA” batteries (supplied), paying attention to the polarity indicated in the battery compartment. 3 Replace the compartment cover. Introduction Open the battery compartment cover in the direction of the arrow. Operation • • Aim the remote control at the remote sensor and press control buttons to operate. Operate the remote control within 30° angle on either side of the remote sensor, up to a distance of approx. 5 meters. Approx.
Connections Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CABLE), see page 15 for Cable TV connections. Combination VHF/UHF antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Antenna jack Antenna jack Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack on the back of the TV/DVD.
Cable TV connections This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some cable companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company.
Connections Connecting to optional equipment INPUT SELECT You can enjoy VCR, camcorder or TV game with connection to external input. GAME Using the audio/video inputs Press INPUT SELECT repeatedly to select the desired mode. “VIDEO1”, “VIDEO2”, “ColorStream” or TV channel will display on the screen for 4 seconds. TV Channel VIDEO1 VIDEO2 (Rear lower left) (Left side) ColorStream VIDEO1 Note: This key will not operate in DVD mode.
Connecting to an optional equipment with S-video output : Signal flow Connections If you connect a VCR with an S-VIDEO cable to the S-VIDEO IN jack on the left side of the TV/DVD, you must also connect the audio cables to the AUDIO IN (LINE 2 IN) jacks on the left side of the TV/DVD. The S-VIDEO cable only carries the video signal. The audio signal is separate. Left side (LINE 2 IN) Select the “VIDEO2” by pressing INPUT SELECT repeatedly. (red) (white) Ex.
Connections Connecting to optional equipment (Continued) You can enjoy high quality dynamic sounds by connecting the TV/DVD to optional audio equipment. * This section uses the following reference mark.
Connecting to an amplifier equipped with an MPEG audio decoder Connections MPEG2 sound You can enjoy motion picture and live concert DVD video discs encoded via the MPEG2 recording system with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor.
Connections Power source Power connection To DC input jack AC 120V, 60Hz 2 3 1 AC adapter (supplied) AC cord (supplied) TO USE AC POWER 1. Connect the AC cord to the AC adapter. 2. Connect the AC adapter plug into the TV/DVD’s DC input jack. 3. Connect the AC cord into a wall outlet. Notes: • Make sure to insert the plug of each cord securely. • During use the AC adapter becomes warm. This is not a malfunction.
Basic setup Setting the language POWER This TV/DVD can display the on screen language in English, Spanish or French in the TV mode. Select the language you prefer first, then proceed with the other menu options. CANCEL ENTER / / / MENU Setting the language To turn on the TV/DVD, press POWER. The Power indicator on the front of the main unit will light. 2 Press MENU and then press “SETUP”.
Basic setup To memorize channels 0–9 This TV/DVD is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV/DVD’s memory. In addition to normal VHF and UHF channels, this TV/ DVD can receive up to 113 Cable TV channels. To use this TV/DVD with an antenna, set the TV/CABLE selection to the TV position.
TV operation TV operation POWER 0–9 VOL +/– TV operation 1 Adjust the volume level by pressing VOL + or –. The volume level will be indicated on the screen by white bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of white bars also decreases. VOLUME 3 32 Set the TV/CABLE selection to the appropriate position. 22 4 Press direct channel selection (0–9) to select the channel.
TV operation TV operation (Continued) SLEEP RECALL CH RTN MUTE VOL +/– GAME CH +/– TV operation ■ CHANNEL UP/DOWN Press and release CH + or –. The channel automatically stops at the next channel set into memory. For proper operation, before selecting channels, they should be set into the memory. See page 22 “To memorize channels”. ■ SLEEP To set the TV/DVD to turn off after a preset amount of time, press SLEEP on the remote control.
Closed captions WHAT IS CLOSED CAPTIONING? This television has the capability to decode and display closed captioned television programs. Closed captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language. CLOSED CAPTION Closed captions Text: The text closed caption mode will usually fill the screen with a programming schedule or other information.
TV operation Setting the V-Chip 0–9 An age limitation can be set to forbid children to see and hear violent scenes or pictures for adults, etc. The TV/DVD corresponds to “TV RATING” and “MOVIE RATING”. To use the V-Chip function, you must register a password. CANCEL ENTER Notes: • If you forget the password, you cannot set the V-Chip. • To avoid forgetting the password, write it down and keep in the safe place. To register password 1 MENU To change password Press MENU and then press V-CHIP.
RECALL CANCEL ENTER / / / To set the V-Chip 1 Repeat steps 1 ~ 3 in “To register password” or to select on page 26, then press “TV RATING”. 4 or Press to select the desired rating.
TV operation Picture control adjustment/ Adjusting the picture mode Picture controls are factory preset but you can adjust them individually as follows: And also you can select four picture modes—Standard, Sports, Movie, and Memory—as described in the following table: CANCEL / / / MENU Picture control adjustment 1 Press MENU and then press “PICTURE”. Adjusting the picture mode or PICTURE AUDIO to select SETUP V-CHIP 1 Press MENU and then press “PICTURE”.
Selecting the color temperature CANCEL / / / MENU Selecting the color temperature 1 Press MENU and then press “PICTURE” PICTURE or AUDIO to select SETUP V-CHIP PICTURE SPORTS BRIGHTNESS CONTRAST COLOR TINT SHARPNESS 25 50 25 0 25 :SELECT 2 Press or TV operation MODE :ADJUST to select “COLOR TEMPERATURE”. PICTURE AUDIO SETUP V-CHIP PICTURE COLOR TEMPERATURE COOL COOL/MEDIUM/WARM RESET :SELECT 3 Press mode.
TV operation Sound control adjustment/ Stereo and Second Audio Program (SAP) CANCEL / / / Sound controls are factory preset but you can adjust them individually as follows: The TV/DVD is equipped with a feature known as multi-channel TV sound or MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs with high fidelity stereo sound.
Basic playback Playing a disc This section shows you the basics on how to play a disc. CAUTION Keep your fingers well clear of the disc slot when disc is loading or unloading. Neglecting to do so may cause serious personal injury. DVD VCD CD POWER VOLUME +/– PLAY STOP EJECT Basic playback Preparations: • When connecting to other equipment, turn the power off. 1 4 Reading • A menu screen will appear on the TV screen if the disc has a menu feature. Press / or / to select title, then press ENTER.
Basic playback Playing a disc (Continued) To obtain a higher quality picture Occasionally, some picture noise may appear on the TV screen while playing a DVD video disc because the high resolution pictures on these discs include a lot of information. In such case, you may reduce the SHARPNESS with the Picture control adjustment menu (see page 28). About DVD VCD VOL +/– ENTER / / / CD The DVD VCD CD icons on the heading bar show the playable discs for the function described under that heading.
REV PLAY PAUSE FWD SKIP / SLOW / DVD VCD CD Playing in fast reverse or fast forward directions Press REV or FWD during playback. To resume normal playback Press PLAY. REV: Fast reverse playback FWD: Fast forward playback Each time you press REV or FWD button, the playback speed changes. Playing frame by frame Press PAUSE during still playback. To resume normal playback Press PLAY. Each time you press PAUSE, the picture advances one frame.
Advanced playback Zooming/Locating desired scene 0–9 ZOOM JUMP CANCEL ENTER / / / RECALL DVD VCD CD DVD VCD CD Zooming This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame. 1 Press ZOOM during playback. The center part of the image will be zoomed in. Each press of ZOOM will change the ZOOM 1 (x 1.3), 2 (x 1.5) and 3 (x 2.0).
Repeat playback/A-B Repeat playback PLAY MODE ENTER PLAY SKIP / REPEAT A-B DVD VCD 1 Repeat playback DVD VCD Press PLAY MODE during playback or stop mode. A-B Repeat playback A-B repeat playback allows you to repeat a section between two selected points. 1 Press REPEAT A-B during playback. The start point is selected. A 2 [DVD] Press ENTER to select “Chapter” or “Title”. The unit automatically starts repeat playback after finishing the current title or chapter.
Advanced playback Program playback/Random playback 0–9 You can arrange the playback order of tracks or files on the disc. And the unit can also select tracks or files at random and playback them. These feature works for Video CD. CANCEL PLAY MODE For Audio CD and MP3/WMA CD, please see “Random playback (CD)” 44 and “Program playback (CD)” 45 . ▲/▼/ / ENTER PLAY VCD 1 Program playback Press PLAY MODE in the stop mode.
Changing angles/Title selection/DVD menu TOP MENU DVD MENU ▲/▼/ / ENTER PLAY ANGLE Changing angles When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from. 1 Press ANGLE during playback. The current angle will appear. 2 Press ANGLE repeatedly until the desired angle is selected. 1/2 Note: Depending on the DVD, you may not be able to change the angles even if multi-angles are recorded on the DVD.
Advanced playback Changing soundtrack language/ Subtitles SUBTITLE AUDIO DVD VCD Changing soundtrack language You can select the language when you play a multilingual disc. 1 Press AUDIO during playback. The current soundtrack language will appear. Subtitles When playing back a disc recorded with subtitles, you can select the subtitle language or turn the subtitle off. 1 Press SUBTITLE repeatedly during playback until the desired language is selected.
1 Disc status/To turn off the PBC RECALL PLAY MODE / ENTER DVD VCD Disc status VCD With each press of RECALL, the status of the disc will appear on the screen and change as follows. To cancel the display, press RECALL again. To turn off the PBC (see page 8) 1 Press PLAY MODE in the stop mode. 2 Press / to select “Mode”, then press ENTER repeatedly until “Off” appear.
Advanced playback MP3/WMA/JPEG/DivX® and Audio CD operation This player can playback the MP3/WMA/JPEG/DivX®-data which has been recorded on CD-R or CD-RW. To produce the MP3/ WMA/JPEG/DivX®-data, you need a Windows-PC with CD-RW drive and a MP3/WMA/JPEG/DivX®-encoding Software (not supplied). The Apple-HFS-System cannot be played. This player requires discs/recordings to meet certain technical standards in order to achieve optimal playback quality.
TOP MENU ▲/▼/ / ENTER RETURN PLAY STOP CD 1 2 MP3/WMA CD playback Load a disc on which MP3 or WMA files have been recorded in the disc slot. A file browser screen will appear on the screen. Folder-1 Select Files Folder-2 Repeat :Off MP3-1 Mode :Off MP3-2 MP3-3 WMA-1 WMA-2 JPEG Preview WMA-3 Press / Select Files Repeat :Off Mode :Off Music Playing /MP3-2.
Advanced playback MP3/WMA/JPEG/DivX® and Audio CD operation (Continued) STOP TOP MENU DVD MENU ▲/▼/ / ENTER PAUSE PLAY SKIP ¢ ANGLE You can select your desired JPEG file on the file menu and picture menu. The selected JPEG file is automatically adjusted to the TV screen. (When the aspect ratio of the JPEG file is different to the TV screen, the black bar will appear at the top and bottom, or the both sides of the TV screen.) CD 1 2 JPEG CD playback CD /Picture-01.
STOP ▲/▼ ENTER PLAY CD 1 2 DivX® CD playback Load a disc on which DivX® files have been recorded in the slot. A file browser screen will appear on the screen. /Movie-01.DIVX Movie-01 Movie-02 Movie-03 Movie-04 Movie-05 Movie-06 Movie-07 Movie-08 Press / Select Files Repeat :Off Mode :Off JPEG Preview to select file. Playing DivX® VOD content DivX® VOD content is protected by DRM (Digital Rights Management) system. This restricts playback of content to specific registered devices.
Advanced playback Repeat and program playback using file browser ▲/▼/ / ENTER PLAY SKIP CD 1 Repeat playback (CD) In the file browser, press / “Repeat” during stop mode. Folder-1 Folder-2 MP3-1 MP3-2 or CD / to select 1 Random playback (CD) In the file browser, press / “Mode” during stop mode. Select Files to select Select Files Folder-1 :Off Folder-2 Repeat :Off Mode :Off MP3-1 Mode :Off MP3-2 MP3-3 Press ENTER to select “Track” or “All”. 2 Press ENTER to select “Random”.
▲/▼/ / ENTER PLAY CD 1 Program playback (CD) In the file browser, press / or “Edit Mode”, then press ENTER. Folder-1 Folder-2 MP3-1 / to select Repeat :Off Mode :Off 4 Press / or / to select “Program View”, then press ENTER. Program View shows only the programed files that you have added in step 2. MP3-1 MP3-2 MP3-3 Edit Mode Edit Mode Browser View Clear Program WMA-3 MP3-2 MP3 3 When “Edit Mode” is black color, you can mark the files which you want to add into Program list.
Function setup Customizing the function settings SETUP ENTER ▲/▼/ / You can change the default settings of the DVD mode to customize performance to your preference. RETURN DVD VCD CD 1 Setting procedure Press SETUP during stop mode. The following on-screen display appears. Parental DRC E.B.L. Menu 5 : Off English • Repeat steps 3 and 5 to change QSound TV Subtitle Screen Set Password : 4:3 On English Output Display Audio other option.
Setting details Section Option Details Page Menu Subtitle Audio To select the language of “Menu”, “Subtitle” and “Audio” if more than one language are available on the disc. TV Screen To select a picture size according to the aspect ratio of your TV. Display To turn On or Off the operational status display on the screen. Picture Mode To select a preferred picture mode from “Video”, “Film” or “Auto”. JPEG Interval To select a preferred setting for the slide show playback.
Function setup Customizing the function settings (Continued) Setting details Parental DRC E.B.L.
JPEG Interval Picture Mode There are two types of source content in pictures recorded in DVD video discs: film content (pictures recorded from films at 24 frames per second) and video content (video signals recorded at 30 frames per second). Make this selection according to the type of content being viewed. Auto: Film: Select this position normally.
Function setup Customizing the function settings (Continued) Setting details Parental E.B.L. DRC : Off DRC Menu E.B.L.
■ Set the new password 1) Press or to select “Password”, then press ENTER. “Enter Current Password” screen will appear. 2) Press Number buttons (0–9) to input the current password (If the password has not been set yet after you purchase this unit, it is “0000”). 3) Then press ENTER. “Enter New Password” screen will appear. Press Number buttons (0–9) to input the new password. 4) Press ENTER. Now your new password has been set. Be sure to remember this number! If you forget the password.
Function setup Temporary cancel the rating level by DVD disc 0–9 Depending on the DVD disc, the disc may try to temporarily cancel the rating level that you have set. It is up to you to decide whether to cancel the rating level or not. ENTER RETURN DVD Temporary cancel the rating level by DVD disc Note: This temporary cancellation of rating level will be kept until the disc is ejected. When the disc is ejected, the original rating level will be set again automatically. 1 Load a DVD disc.
Others Language code list Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” 48 .
Others Troubleshooting Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS POSSIBLE SOLUTIONS PAGE POWER • Make sure the connection of the AC adapter and AC cord. • Try another AC outlet. • Unplug unit, then plug it back in. 20 Poor sound or No sound. • Station or Cable TV may have problems, try another station.
SYMPTOMS POSSIBLE SOLUTIONS PAGE DVD Playback doesn’t start. • No disc is loaded. • The disc may be dirty. Clean up the disc. • The unit cannot play CD-ROMs, etc. 31 7 8 No picture. • TV/DVD selector is not set correctly. 31 No sound. • Check the input selector of the amplifier is set properly. • The unit is in the special playback mode. • Select the correct Audio Input/Output position on AV amplifier. – 33 18 Picture is distorted during fast reverse/forward playback.
Others Reception disturbances Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV/DVD is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast. IGNITION Black spots or horizontal streaks may appear, the picture may flutter or drift.
Specifications General Power supply Power consumption Weight Dimensions AC 120V 60Hz (with supplied AC adapter) Operation: 50 W, Stand by: 1 W (with supplied AC adapter) 13.2 lbs (6.0 kg) Width: 18-3/4 inches (476 mm) Height: 13-15/16 inches (353.
Limited United States Warranty LCD TV/DVD Combination - Depot Repair Warranty Toshiba America Consumer Products, L.L.C. ("TACP") makes the following limited warranties to original consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS LCD TV/DVD COMBINATION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. LCD TV/DVD COMBINATIONS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A.
How to Obtain Warranty Services If, after following all of the operating instructions in this manual and checking the section "Troubleshooting," you find that service is needed: (1) For instructions on how to obtain warranty service for your LCD TV/DVD Combination, contact TACP's Consumer Solution Center toll free at 1-800-631-3811.
ColorStream® is a registered trademark of Toshiba America Consumer Products, L.L.C. is a trademark of Toshiba America Consumer Products, L.L.C.
