÷ ÷ 1/19/04, 5:56
Dear Customer, Thank you for purchashtg this Toshiba TV. This manuai will heip you use the many exciting features of your new TV. Before operating the TV, please read this manual completely, and keep it nearby for future reference.
l stallatio , Care, arid Service _nstallatien Follow these recommendations and precautions and heed all warnings when installing your TV: 5_)Do not use this apparatus 16_)Never modify this equipment. Changes or modifications may void: al) the warranty, and b_)the user's authority to operate this equipment under the rules of the Federal Comm_lnications Commission. near water, 17_) DANGER: RISK OF SERIOUS PERSONAL inJuRY, DEATH, OR EQUIPMENT DAMAGE.
3o} [Thisitem app//estopmj_:tien 7Vson#.4 ] Ifthe air temperature rises suddenly (for example, when the TV is first delivered}, condensation may form on the lenses. This can make the picture appear distorted or the color appear faded. If this happens, turn off the TV for 6 to 7 hours to allow the condensation to evaporate. 24} Always operate this equipment from a 120V AC, 60 Hz power source only.
÷ Welcome to Toshiba Congratulations! You have purchased one of the finest color TVs on the market, The goat of this manual is to guide you through setting up and operating your Toshiba TV as quickly as possible, You may need to purchase other audio or video cabies to connect your equipment, See "Connecting your TV" on page 7 for more information, Please read alI the safety and operating instructions carefully before you begin, Exploring your new TV "Youcan operate your TV by using the buttons on the
÷ Connecting your TV If you haven't connected electronic equipment before, or you have been frustrated in the past, you may wish to read this section. (Cables are not supplied.) A coaxiat cable is the standard cable that comes in from your antenna or cable converter box. Coaxial cables use "F" connectors. • Standard AN (audio/video) cables are usually color coded according to use: yelIow for video and red and white for audio.
÷ Connecting a cabme converter box This television has an extended tuning range and can tune most cable channels without using a cable company supplied converter box. Some cable companies offer "premium pay channels" in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device, which is generally provided by the cable company.
÷ Connecting and a VCR a DVD pmayerisateHite receiver You wilI need: o three coaxial cables o one set of standard A/V cables o one S-video cable o one pair of standard audio cables This connection allows you to watch DVD/sateilite, VCR, or TV programs. To satellite Note: You can use a standard video cable instead of t,he S-v/dee cable, but the picture quality w/fl decrease.
÷ Connecting This connection camcorder. a camcorder allows you to watch video materials recorded on a You will need: • one set of standard A/V cables Note: For better picture quafity, if your camcorder has S-video, you can connect an S-video (and standard audio cables) to WDE01 on t,_e back of the T_ZDo not connect a standard video cable and an S-video cable to WDE01 simultaneously.
÷ Using the remote controR Preparing the remote controm for use With the remote control, you can operate your TV, most VCR and DVD player models, and cable TV converters together, even if they are different brands. If you will be using your TV with a Toshiba VCR or DVD player, your remote control is already programmed and ready to use. If you own different brands of VCRs, DVD players and/or converters, you first have to program your remote control.
÷ To contro_ a cabte TV conveFteF: CABLE Power Program the remote control to recognize the brand of your converter Channel Numbers (see "Programming the remote control for use with a VCR, DVD player, or cable TV converter" Channel +/- below), The buttons shown at right wilI control the cable TV converter, CH Enter Press the CABLE button first, Programming the remote control for use with a VCR, DVD player, or cable TV converter This remote control is pre-programmed to operate Toshiba VCRs and DVD players
÷ Admiral Adventure Aiwa Akai Audio Dynamics Bell & Howell Broksonic Canon Citizen Craig Curtis Mathes Daytron DaX Electric 02,18 33,50 14,51,59 02,18 06,47 Pentaz Philco 15 07,14 21,26,33,50,55 14 Philips Pioneer 09 12 Portland Pro Scan Quasar RCA 07,14,27 10,15 46 16, 60 14, 59 59 46,48,54 46 18 21 23,26,33,35,43,50 12,13,47 14,16,20 09 56,62,63 Logik LXI Montgomery Ward Samsung Sansui 16,20,27,40,42,60 08,12,14,31 30 20, 39 06,12,47 Sanyo Scott Sears 04,05,33,43 06,09,11,12,15 08,6
÷ Learning POWER Sleep about the remote control turns the TV on and off programs the TV to turn off at a set time (page 28) TV/Video selects the video input source (page 27) Channel + / - cycles through programmed channels (page 16) TV/VCR/DVDiCABLE TV/VOR/DVD/Oable select TV, VCR, DVD, or CABLE mode (page 11) Channel allow direct access to channels (page 16) POWER-Numbers Volume + / - adjusts the volume level Channel Return Menu/Enter allows access to programming grammed menu informati
÷ Setting up your TV After you have installed the batteries and programmed the remote control, you need to set some preferences on the TV using the menu system. You can access the menu system with the buttons on the remote control. • When you make a menu selection, your changes occur immediately. You do not have to press MENU or EXIT to see your changes. • After five seconds, the menu screen will automatically close if you do not make a selection. Your changes will still be saved.
÷ Adding channels to the TV's memory Your TV will stop on specific channels that are stored in the TV's channeI memory when you press ChanneI + or -. Use the steps below to set all active channels in your area automatically. Programming channels automatically Your TV can automatically detect aII active channels and store them in its memory. After the TV has stored the channels in its memory automatically, you can add or erase channels manually. To add channems automatically: 1.
÷ Using the TV's features Adjusting Switching the channem settings between two channels You can switch between two channels without entering an actua[ channel number each time. To switch - Channel Numbers between two channege: 1. Select the first channel you want to view. 2. Select a second channel using the Channel Number buttons (0-9, 100). 3. Press CH RTN. The previous channel will be displayed. Each time you press CH RTN, the TV will switch back and forth between the two channels.
÷ To clear your favorite channems: 1. Select a channel you want to clear. 2. Press MENU, then press 4 or I_-to display the OPTION menu. 3. Press _ or V to highlight FAVORFE CH. 4. Press 4 or _ to display the FAVORITE CH menu. SET/CLEAR will be highlighted. Ohannel Numbers _,_T CLEAR SET UP CH TVCABLE SELECT END _ _ EXiT 7 36 12 125 13 28 SET - Menu/ Enter 4 1 63 40 97 1!2 ENTER i_i¥i!tii_ ;_ !_! i_ -- Exit 5. Press 41or _" to highlight CLEAR.
÷ 3. Press ,,_or _ to display the V-CHIP menu. vocHi_ i BLOCKING SELECT END ,, Note: RESET [0-9] EXIT SET if you fordet your PiN code, press RECALL four times within five seconds from the V-CHIP menu, This allows you to proceed to the BLOCKING menu and resets your PIN code, ENTER 4. Use the Channel Number buttons (0-9) to enter your PIN code. If you are accessing the V-Chip menus for the first time, seiect a four-digit number to be your PIN code. Press ENTER. The BLOCKING menu appears.
÷ MPAA Ratings X NO17 R PG13 PG G For aduIts onIy. Not intended for anyone 17 or under. Restricted. Under 17 requires an accompanying parent or aduIt guardian. Parents strongly cautioned. Some materiaI may be inappropriate for children under 13. Parental guidance suggested. Some material may not be appropriate for children. General audience. Appropriate for all ages. Youth TV Ratings Y7FV, Y7 Directed to older children. This program is designed for children age 7 and above.
÷ To use the V-Chip to bmock programs by rating: 1, Press MENU, then press _ or _ to display the OPTION menu= 2= Press _ or V to highlight V-CHIR 3.
÷ BIocMng unrated movies or programs Some movies and programs are not rated. You can block these movies and programs using the V-Chip. To bmock unrated movies or programs: 1. Press MENU, then press 4 or P to display the OPTION menu. 2. Press ,A or V to highlight V-CHIR 3. Press _ or _ to display the V-CHIP menu. 4. Use the Channel Number buttons (0-9) to enter your PUNcode. If you are accessing the V-Chip menus for the first time, select a four-digit number to be your PIN code. Press ENTER.
÷ To unlock channems: 1. Press MENU, then press _ or _ to display the OPTION menu. 2. Press _, or V to highlight LOCK and then press _ or I_ to display the LOCK menu. 3. Use the Channel Number buttons (0-9) to enter your PIN code, then press ENTER. The LOCK menu appears. 4. Press _ or V to highlight CH LOCK and press _ or _ to display the CH LOCK menu. 5. Press _ or _ to highlight CLEAR and clear all channels from the list of Iocked channeIs. Press ENTER. 6. Press EXiT to return to normaI viewing.
÷ Labeling channels Channel labels appear over the channel number display each time you turn on the TV, select a channel or press the Recall button. "You can choose any four characters to identify a channel. To create channel [abems: 1. Select a channel you want to label. 2. Press MENU, then press 4 or P until the OPTION menu appears. 3. Press _ or V to highlight CR LABEL.
÷ Setting the dock You must set the clock before you can program the ON/OFF timer. To set the clock: (E×ampme: 8:30 AM) 1. Press MENU, then press 4 or l_ to display the OPTION menu. 2. Press A or V to highlight ON/OFF TIMER. LANGUAGE CH LABEL FAVORITECH V-CHIP LOCK _DOvN ENGLISH START START _" START START D SELECT SET OFF _i _ _ ADJUST ENTER _ Enter 3. Press _ or _ to highlight SET, then press ENTER. The ON/OFF TIMER menu appears. 4.
÷ 5. Press ,& or V to set the desired hour, then press _. CLOCK 12:00 AM _AM OH 001 CLEAR OEFTIMER 12:00 AM SELECT END CLEAR ADJUST _ _ EXIT & Y 6. Set the desired minutes and channel, as in step 5. 7. Press _ or _ to select ONCE or DAILY timer date. PCTUI_E AUDO - Menu/ Enter _P CLOCK 12:00 AM 7:00 AM CN 012 ONCE #A_Y CLEAR OFFTIMER 12:00 AM SELECT END 4_ _ EXIT CLEAR SET ENTER Note: The ON TIMER has a one-hour autornatic shut off.
÷ Adjusting the picture quality You can adiust the picture quality to your personal preferences, including the contrast, brightness, color, tint, and sharpness. The qualities you choose will be stored automatically in your TV's memory so you can recall them at any time. To adjust the picture quality: 1. Press MENU, then press _ or I_ to display the HCTURE CONTRAST _64 BRIGHTNESS _""'E32 COLOR _"""'_32 TINT _ SHARPNESS SELECT _ Y _"""'_32 ADJUST menu. - Menu 0 _ 2.
÷ Setting the sleep timer "Youcan set the TV so it turns off automatically. To set the sleep timer: Repeatedly press SLEEP on the remote control to set the length of time untiI the TV turns off. The clock wiII count down 10 minutes for each press of the SLEEP button (120, 110, ===10,0)= After the sleep time is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating.
÷ Adjusting the sound Muting the sound Press MUTE to temporarily turn off the sound. While the sound is off, the screen wilI display the word MUTE in the lower right-hand corner. To restore the sound, press MUTE again. Selecting stereo/SAP broadcasts "You can listen to high-fidelity stereo sound with the Multi-channel TV Sound (MTS) feature. MTS can also transmit a second audio program (SAP) containing a second language or other audio information.
÷ Adjusting the sound quality You can change the sound quality of your TV by adiusting the bass, trebIe, and balance. To adjust the sound quality: 1. Press MENU, then press _ or _ until the AUDIO menu appears. BASS TREBLE BALANCE SURROUND _"""'_32 _"""'_32 _ OFF STABLESOUND OFF SELECT A V ADJUST - Menu 0 4 2. Press _ or V to highlight the item you want to adiust. 3. Press 4 or _ to adiust the level.
÷ Using the StableSound ® feature The StableSound feature limits the highest vol_Jme leveI to prevent extreme changes in volume when the signal source is changed. To turn on the StableSound _ feature: 1. Press MENU, then press 4 or _ until the AUDIO menu appears. 2. Press _ or V to highIight STABLE SOUND. 3. Press 4 or _ to highlight ON. BASS _m"""""_32 TREBLE BALANCE SURROUND _ON _''E32 _ OFF SELECT 0 OFF A V ADJUST _ To turn off the StabmeSound cefeature: Highlight OFF in step 3 above.
÷ Troubleshooting Before calling a service technician, please check the following table for a possible cause of the problem and some solutions. Problem Solution TV will not turn on o Make sure the power cord is piugged in, then press POWER. o The remote control batteries may be dead. Replace the batteries.
÷ Specifications Picture tube Type 14 (357 mm diagonal) Television system NTSC standard Channel coverage VHF: 2-13 UHF: 14-69 Cable TV: 4A, A-5-A-I, Aq, J-W, W+ 1-W+84 Power source 120V AC, 60 Hz Power consumption 8O W Audio power 2+5W+ 2+5W Speaker type 1-5/8 x 2-13/16 inches (41 x 71 mm) x 2 pcs+ Video/Audio terminals S+VIDEO INPUT YqNPUT: lV (p-p), 75 ohm, negative sync+ CqNPUT: 0+286V (p-p) (burst signal), 75 ohm VIDEO/AUDIO INPUT VIDEO: lV (p+p), 75 ohm, negative sync+ AUDIO: 150 mV
÷ Limited United States Warranty For 24" FST PURE ® and AH Smaller Toshiba America Consumer Products, EL.C. ("TACP") maker the following limited warranties to original consumers in the United States THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER and operated Limited customer USED IN THE U.S.A.
÷ Limited Canada Warranty For 24" FST PURE ® and AH Smaller Toshiba of Canada Limited ("TCL") makes the following limited warranties Your ReeponsibiUity to original consumers in Canada THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEW_NG THIS TELEVISION ORIGINAL CONSUMER PURCHASER THE ABOVE WARRANT_ES (1) You must provide your bill of sale or other proof of purchase PURCHASER (2) All warranty servicing of this television must be made by an Authorized OR TRANS
÷ TOSHmBA Head Office ÷ A_,_ERmCA CONSUMER PRO_I3&JCTS _ L,L,Co 82 Totowa Road, Wayne, NJ 07470 National Service Division 1420B Toshiba Drive, Lebanon, TOSH|BA 191 McNabb Markham, OF Street Ontario TN 37087 CANADA LiMiTED L3R 8H2 TEL.: (905) 470-5400 Service Centers: TORONTO: 191 McNABB MARKHAM, MONTREAL: ONTARIO, L3R 8H2, CANADA TEL.: (905) 470-5400 18050 TRANS CANADA, QUEBEC, VANCOUVER: STREET, H9J-4A1, KmRKLAND, CANADA TEL.: (514) 390-7766 22171 FRASERWOOD WAY, RICHMOND, B.C.
