User's Manual

167
Advanced features
Network Device Setup
The search retrieval stops when content is being played.
Network Device Setup
In order to set the access the External Control Setup, Media
Renderer Setup, or Device Name Setup, you must use the Network
Device Setup menu.
External Control Setup
1 Press the MENU button. Select NETWORK, Network
Device Setup
, and External Control Setup, and then press the
OK button.
2 Select External Control Setup, and press the OK button.
3 Use the ( / arrow) buttons to select and set Enable Control
to On or Off.
To access the Home Control Profile:
1 Press the MENU button. Select NETWORK, Network
Device Setup
, and External Control Setup, and then press the
OK button.
2 Use the ( / arrow) buttons to select Home Control Profile
and press the OK button.
The Home Control Profile window will appear.
3 Use the ( / / / arrow) buttons to navigate to the User
Name or Password field. The keypad will appear so that you
can enter in the user name and password. You can use the
remote control keypad, the software keypad, or the
USB/QWERTY keyboard to enter in the user name and
password.
❖ To use the remote control keypad, use the remote control
up/down buttons to enter the name and password, and
press the BLUE button.
❖ To use the software keyboard, press the GREEN button.
Use the number and letter buttons to enter in the user name
and password, and press the BLUE button to submit.
❖ To use the USB/QWERTY keyboard, use the number and
letter buttons to enter in the user name and password, and
press the BLUE button to submit.
NOTE