User's Manual

133

Advanced features

Setting up the Network

Assisted Setup

1 Press the MENU button. Select NETWORK > Network

Setup, and then press the OK button.

2 Press the ( / arrow) buttons to select Wireless Setup, and

then press the OK button.

3 Press the ( / arrow) buttons to select Assisted Setup, and

then press the OK button.

4 Press the ( / arrow) buttons to select the desired AP, and

then press the OK button.

Check the MAC address on the label or in the manual of the AP and

select an AP.

5 Select Security Key, and then press the OK button.

The Software Keyboard appears.

6 Input the Security Key using the Software Keyboard. For more

information, see “Using the software keyboard” on page 139.

7 To save your settings, press the BLUE button.

The Security Key must adhere to the following conditions:

❖ TKIP/AES: 8-63 ASCII or 64 Hex characters

❖ WEP: 5 or 13 ASCII or 10 or 26 Hex characters

8 Select Done, and then press the OK button.

Settings are not saved if the BACK button is pressed before Done is

selected.

Manual Setup

1 Press the MENU button. Select NETWORK > Network

Setup, and then press the OK button.

2 Press the ( / arrow) buttons to select Wireless Setup, and

then press the OK button.

3 Press the ( / arrow) buttons to select Manual Setup, and

then press the OK button.

NOTE